Erasing Tracks On The Usb Device - Sony GigaJuke NAS-E35HD Operating Instructions Manual

Erasing tracks on the USB device

You can erase tracks on a connected USB device
from this unit.
Note
Make sure not to disconnect the USB device or turn the
power off until the erasing has completed.
1
Select the USB function and
connect the USB device with the
tracks you want to erase.
2
Enter the Option menu, and then
select "Erase".
3
Press  /  to select the item to be
erased, and then press ENTER.
 To erase the entire contents of the USB
device:
Select "All Erase".
 To erase a folder:
Select the folder, and then select "All
Track".
 To erase one track only:
Select the folder that contains the track
you want to erase, and then select the
track.
4
Press  /  to select "OK?", and then
press ENTER.
To cancel erasing
Press .
It may take a while for the cancellation to take
effect.

GB