Appendix A Technical Specification - Jinhan JHJDS3012A Manual

Table of Contents

Advertisement

8.1Warranty profile (JHJDS30xxx series portable digital storage oscilloscope)
Guarantee the production and sales of products of the company, two years from the date of
delivery in authorized dealer, there will be no material and process defects. As in the
detailed rules of product warranty to prove defective, we will repair or replacement service.
In addition to the profile or guarantee the use of any of the warranty, we do not make any
express or implied, including but not limited to implied warranties of merchantability and
special applicability. The company for indirect, special, or shall not be liable for the
resulting damage.
Appendix A: technical specifications
Unless otherwise specified, all technical specifications are used to set the attenuation switch
as 10 x of the probe and the series oscilloscope. To verify the oscilloscope is in line with
the technical specifications, the oscilloscope must meet the following conditions:
● Oscilloscope must be within the specified operating temperature run continuously for more
than thirty minutes.
● If the operating temperature range, reach or exceed 5 degrees are calibrated, in addition to
the specifications marked "typical", all specifications are guaranteed.
● Low oscilloscope must belong to the factory calibration period.
74

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jhjds30 seriesJhjds3012eJhjds3022eJhjds3022a

Table of Contents