The Cursor Measurement - Jinhan JHJDS3012A Manual

Set up automatic shutdown: press "MENU" find auxiliary function MENU page, →Press "F3" set the
automatic shutdown time.
Settings save electricity: press "MENU" find auxiliary function MENU page,→Press the "F4" set
time to save power.
Set up the factory pattern recovery: press "MENU" find auxiliary function MENU page, press "F1"
→"F5" the recovery of oscillograph.
● MEAS：Press the "MEAS" screen will display the current measurement menu

2.9 The cursor measurement

In this mode, the cursor X or Y way come in pairs, and can be manually adjust the spacing of
the cursor. Reading is the measurement of voltage or time value. Manual cursor measurement,
follow these steps:
●When using the cursor, needs first to set the source into all you have to measure the channel.
Press the "HORI"→"F2" select source channel (in this setting for CH1)
● Press the "F1" choose "time", "voltage" or "off"
43