Language; Local Area Code; Regional Area Code; Registration - RCA H5400 User Manual

NOTE: The charge indicator on the handset charge cradle turns on
to indicate the handset battery is charging
Allow the handset to charge for 12 hours prior to first use. if
you don't properly charge the system, battery performance
is compromised.
T
ELEPHONE
There are five programmable menus available: Language, Local Area
Code, Regional Area Code, Clear All Memory and Registration.
L
ANGUAGE
1. Press the MENU button once, LANGUAGE will show in
the display.
2. Press SELECT or STORE to select language setting. ENGLISH
is the default.
3. Press < or > button on the handset to select language among
English, French and Spanish.
4. Press SELECT again to confirm your selection.
L A
OCAL REA
1. Press the MENU button once, then press ">" button until
AREA CODE shows in the display.
2. Press SELECT/SAVE button or STORE button to enter Set
Area Code mode.
3. Use the number pad to enter your three digit area code.
4. Press SELECT button again to store the setting.
R
EGIONAL
You can enter six regional codes.
1. Press the MENU button once, then press ">" button until
REGIONAL CODE shows in the display.
2. Press SELECT/SAVE button or STORE button to enter Set
Regional Code mode.
3. Use the number pad to enter your three digit regional code.
4. After finished to edit one regional code, the cursor will jump
to the next one.
5. You can also use the number pad to enter another one.
6. After finished editing, press the SELECT button to save.
R
EGISTRATION
Registration links the base (25413/25414/25415) to a cordless
handset. Once a handset is registered it can use the base's
phone connection. A cordless handset will not operate until it is
registered to the base. During the registration process, keep the
handset near the base.
1. Press the MENU button once, and then press ">" button until
REGISTRATION shows on the display.
2. Press SELECT/SAVE button or STORE button to select
Registration mode.
3. Press < or > button on the handset to select Yes.
4. Press SELECT/SAVE to confirm. The display will show
" REGISTER... ".
S U
ET
C
ODE
A C
REA ODE
P
9