Ialing Aaller Eleting The Urrent Eleting Ll Aller Aller Id Errors - RCA H5400 User Manual

1. Make sure the phone is OFF (not in talk mode).
2. Press DIR/
call record is displayed.
Depending on (a) how the incoming caller's phone number is
formatted when received, and (b) whether or not you pre-
programmed your local area code into memory, you may
need to adjust the format of the caller's phone number before
dialing it back.
The format button lets you change the format of the
displayed number. Available formats include:
Number of digits
Eleven digits
Ten digits
Seven digits
NOTE: If the phone company does not supply all ten digits of an
incoming caller's number, you will not be allowed to adjust the format
of that number.
Scroll to the number you want to call back:
3. If the number does not dial as shown, press the format
button. Repeat if necessary, until the correct number of digits
show in the display.
4. Press the TALK button. The number dials automatically.
D
ELETING THE
To delete only the record in the display:
1. Use the CID button and then < or > button
desired Caller ID record.
2. Press delete.
D
ELETING
To delete all the Caller ID records in memory:
1. Use the CID button and then < or > button
ID record.
2. Press and hold DELETE. The display asks DELETE ALL? for
several seconds.
3. Press DELETE
The display
C ID E
ALLER
If there is an error in the transmission of information to your
Caller ID phone,
If you have not subscribed to Caller ID service or it is not
working, NO DATA shows in the display.
button once, then
Explanation
long distance code "1"
+ 3-digit area code
+ 7-digit telephone number.
3-digit area code +
7-digit telephone number.
7-digit telephone number.
C
URRENT
A C
LL ALLER
again, within
will return to standby
RRORS
INCOMPLETE DATA
or button until the desired
C
ALLER
ID R
ECORDS
five seconds, to erase all records.
mode.
shows in the display.
Example
1-317-888-8888
317-888-8888
888-8888
ID R
ECORD
to display the
to display any Caller