Umber; Dialing Sequence; Deleting Stored - RCA H5400 User Manual

5. Press the
display shows ENTER
6. Enter two digits to enter the location, range from 01 to 40.
For example, to store the record in location #5, press "0", "5".
After entering a valid location number, the record
will be saved.
7. To enter another name and number in a different memory
location, return to step 1 and repeat the process.
S
TORING A
1. Make sure the phone is OFF (not in TALK mode).
2. Press the
redial number.
3. Press SELECT
4. Then press SELECT again and ENTER NAME shows in the display.
5. Use the keypad to enter the names.
6. Press STORE button and ENTER LOCATION shows in
the display.
7. Enter two digits to enter the location, range from 01 to 40.
For example, to store the record in location #5, press "0", "5".
After enter a valid location number, the record will be saved.
NOTE : If the number you want to redial has more than
telephone number cannot be stored in memory.
I
NSERTING A
Press the #PAUSE button on the touch-tone pad twice to insert a
delay in the dialing sequence of a stored telephone number
when a pause is needed to wait for a dial tone (for example,
after you dial 9 for an outside line, or wait for a computer access
tone.) Each pause counts as 1 digit in the dialing sequence.
R
EVIEWING
N /N
AMES
To Review: Press
button to scroll through the stored numbers. Or press the
memory location number.
To Change: While viewing the record, press SELECT/SAVE button.
Follow the steps under Storing a Name and Number in Memory.
To Delete: Press
or button (cordless handset) to scroll to a desired memory.
1. While the entry displays, press delete to mark the entry for
deletion. The display shows DELETE?
2. Press delete again to delete the entry.
D
IALING A
Make sure the phone is ON by pressing the TALK button on the
cordless handset.
1. Press the
2. Press the desired memory location button (01-40).
number is shown on the display.
STORE button again to save your selection. The
R N
EDIAL
REDIAL button on the handset
and ENTER
P
AUSE IN THE
, C
HANGING OR
UMBERS
DIR/ on the handset, then press the
DIR/ on the handset or base, then press the
S N
TORED
DIR button.
LOCATION
.

UMBER

NUMBER
D
IALING
D
ELETING
UMBER
to review the
shows in the display.
32
S
EQUENCE
S
TORED
digits, the
or
The
13