RCA ViSyS H5801 User Manual

Interference Information Interference Information
This device complies with Part 15 of the FCC Rules. Operation is This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not subject to the following two conditions: (1) This device may not
cause harmful interference; and (2) This device must accept any cause harmful interference; and (2) This device must accept any
interference received, including interference that may cause interference received, including interference that may cause
undesired operation. undesired operation.
This equipment has been tested and found to comply with the limits This equipment has been tested and found to comply with the limits
f for a Class B digital device, pursuant to Part 15 of the FCC Rules. for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against These limits are designed to provide reasonable protection against T
h harmful interference in a residential installation. harmful interference in a residential installation.
DECT 6.o DECT 6.o
T This equipment generates, uses, and can radiate radio frequency This equipment generates, uses, and can radiate radio frequency
Cordless Handset Cordless Handset
energy and, if not installed and used in accordance with the e energy and, if not installed and used in accordance with the
i instructions, may cause harmful interference to radio communica- instructions, may cause harmful interference to radio communica-
with Caller ID with Caller ID
t tions. However, there is no guarantee that interference will not tions. However, there is no guarantee that interference will not
o occur in a particular installation. occur in a particular installation.
User's Guide User's Guide
P Privacy of Communications may not be ensured when using this Privacy of Communications may not be ensured when using this
p product. product.
I If this equipment does cause harmful interference to radio or If this equipment does cause harmful interference to radio or
This accessory handset is for use This accessory handset is for use
television reception, which can be determined by turning the t television reception, which can be determined by turning the
with Model 25825 base unit. with Model 25825 base unit.
equipment o and on, the user is encouraged to try to correct the equipment o and on, the user is encouraged to try to correct the e
interference by one or more of the following measures: i interference by one or more of the following measures:
• Reorient or relocate the receiving antenna (that is, the antenna
for radio or television that is "receiving" the interference). for radio or television that is "receiving" the interference). f
• Reorient or relocate and increase the separation between the
t telecommunications equipment and receiving antenna. telecommunications equipment and receiving antenna.
• Connect the telecommunications equipment into an outlet on a
Please read this manual Please read this manual c circuit di erent from that to which the receiving antenna is circuit di erent from that to which the receiving antenna is
before operating this before operating this c connected. connected.
product for the first time. product for the first time.
If these measures do not eliminate the interference, please consult If these measures do not eliminate the interference, please consult I
your dealer or an experienced radio/television technician for your dealer or an experienced radio/television technician for
Model H5801 Model H5801
additional suggestions. Also, the Federal Communications additional suggestions. Also, the Federal Communications
Commission has prepared a helpful booklet, "How To Identify and Commission has prepared a helpful booklet, "How To Identify and
Resolve Radio/TV Interference Problems." This booklet is available Resolve Radio/TV Interference Problems." This booklet is available
Please specify stock number 004-000-00345-4 when ordering Please specify stock number 004-000-00345-4 when ordering
copies. copies.

Important Information

Important Information
Warning: Warning:
Equipment Approval Information Equipment Approval Information
party responsible for compliance could void the user's authority to party responsible for compliance could void the user's authority to
Your telephone equipment is approved for connection to the Public Your telephone equipment is approved for connection to the Public operate the equipment. operate the equipment.
Switched Telephone Network and is in compliance with parts 15 and Switched Telephone Network and is in compliance with parts 15 and
Hearing Aid Compatibility (HAC) Hearing Aid Compatibility (HAC)
68, FCC Rules and Regulations and the Technical Requirements for 68, FCC Rules and Regulations and the Technical Requirements for
This telephone system meets FCC standards for Hearing Aid This telephone system meets FCC standards for Hearing Aid
Telephone Terminal Equipment published by ACTA. Telephone Terminal Equipment published by ACTA.
Compatibility. Compatibility.
Licensing Licensing
On the bottom of this equipment is a label indicating, among other On the bottom of this equipment is a label indicating, among other Licensed under US Patent 6,427,009. Licensed under US Patent 6,427,009.
information, the US number and Ringer Equivalence Number (REN) for information, the US number and Ringer Equivalence Number (REN) for
FCC RF Radiation Exposure Statement FCC RF Radiation Exposure Statement
the equipment. You must, upon request, provide this information to the equipment. You must, upon request, provide this information to
This equipment complies with FCC RF radiation exposure limits set This equipment complies with FCC RF radiation exposure limits set
your telephone company. your telephone company.
forth for an uncontrolled environment. forth for an uncontrolled environment.
co-located or operated in conjunction with any other antenna or co-located or operated in conjunction with any other antenna or
The REN is useful in determining the number of devices you may The REN is useful in determining the number of devices you may
transmitter. transmitter.
connect to your telephone line and still have all of these devices ring connect to your telephone line and still have all of these devices ring
For body worn operation, this phone has been tested and meets the For body worn operation, this phone has been tested and meets the
when your telephone number is called. In most (but not all) areas, the when your telephone number is called. In most (but not all) areas, the
FCC RF exposure guidelines when used with the belt clip supplied FCC RF exposure guidelines when used with the belt clip supplied
sum of the RENs of all devices connected to one line should not sum of the RENs of all devices connected to one line should not
exceed 5. To be certain of the number of devices you may connect to exceed 5. To be certain of the number of devices you may connect to with this product. Use of other accessories may not ensure with this product. Use of other accessories may not ensure
compliance with FCC RF exposure guidelines. compliance with FCC RF exposure guidelines.
your line as determined by the REN, you should contact your local your line as determined by the REN, you should contact your local
telephone company. telephone company. IC compliant statement IC compliant statement
This Class B digital apparatus complies with Canadian ICES-003. This Class B digital apparatus complies with Canadian ICES-003.
A plug and jack used to connect this equipment to the premises A plug and jack used to connect this equipment to the premises
Cet appareil numérique de la classe B est conforme à la norme Cet appareil numérique de la classe B est conforme à la norme
wiring and telephone network must comply with the applicable FCC wiring and telephone network must comply with the applicable FCC
NMB-003 du Canada. NMB-003 du Canada.
Part 68 rules and requirements adopted by the ACTA. A compliant Part 68 rules and requirements adopted by the ACTA. A compliant
telephone cord and modular plug is provided with this product. It is telephone cord and modular plug is provided with this product. It is
designed to be connected to a compatible modular jack that is also designed to be connected to a compatible modular jack that is also
compliant. See installation instructions for details. compliant. See installation instructions for details.
Notes Notes
• This equipment may not be used on coin service provided by the he
telephone company. telephone company.
• Party lines are subject to state tari s, and therefore, you may not be Party lines are subject to state tari s, and therefore, you may not be
able to use your own telephone equipment if you are on a party line. able to use your own telephone equipment if you are on a party line.
Check with your local telephone company. Check with your local telephone company.
• Notice must be given to the telephone company upon permanent
disconnection of your telephone from your line. disconnection of your telephone from your line.
• If your home has specially wired alarm equipment connected to the the
telephone line, ensure the installation of this product does not disable telephone line, ensure the installation of this product does not disable
your alarm equipment. If you have questions about what will disable your alarm equipment. If you have questions about what will disable
installer. installer.
Rights of the Telephone Company Rights of the Telephone Company
Should your equipment cause trouble on your line which may harm Should your equipment cause trouble on your line which may harm
the telephone network, the telephone company shall, where the telephone network, the telephone company shall, where
practicable, notify you that temporary discontinuance of service may practicable, notify you that temporary discontinuance of service may
be required. Where prior notice is not practicable and the be required. Where prior notice is not practicable and the
circumstances warrant such action, the telephone company may circumstances warrant such action, the telephone company may
temporarily discontinue service immediately. In case of such temporarily discontinue service immediately. In case of such Congratulations on purchasing this RCA telephone. This system Congratulations on purchasing this RCA telephone. This system
temporary discontinuance, the telephone company must: (1) promptly temporary discontinuance, the telephone company must: (1) promptly
operates in the DECT 6.0 frequency range. This accessory handset operates in the DECT 6.0 frequency range. This accessory handset
notify you of such temporary discontinuance; (2) a ord you the notify you of such temporary discontinuance; (2) a ord you the
will expand the phone systems for Model 25825. will expand the phone systems for Model 25825.
opportunity to correct the situation; and (3) inform you of your right opportunity to correct the situation; and (3) inform you of your right

Features:

Features:
to bring a complaint to the Commission pursuant to procedures set to bring a complaint to the Commission pursuant to procedures set
forth in Subpart E of Part 68, FCC Rules and Regulations. forth in Subpart E of Part 68, FCC Rules and Regulations. • Caller ID
• Tone Dialing Tone Dialing
The telephone company may make changes in its communications The telephone company may make changes in its communications
• Intercom
facilities, equipment, operations or procedures where such action is facilities, equipment, operations or procedures where such action is
• Call Transfer Transfer
required in the operation of its business and not inconsistent with FCC required in the operation of its business and not inconsistent with FCC
This telephone has been designed to be simple to use, however, you This telephone has been designed to be simple to use, however, you
Rules and Regulations. If these changes are expected to a ect the use Rules and Regulations. If these changes are expected to a ect the use
can reach its full potential more quickly by taking a few minutes to can reach its full potential more quickly by taking a few minutes to
or performance of your telephone equipment, the telephone company or performance of your telephone equipment, the telephone company
read this instruction book. This telephone is a multifunction product read this instruction book. This telephone is a multifunction product
must give you adequate notice, in writing, to allow you to maintain must give you adequate notice, in writing, to allow you to maintain
for use with Caller ID services available from your local telephone for use with Caller ID services available from your local telephone
uninterrupted service. uninterrupted service.
company. company.
Your Caller ID phone allows you to: Your Caller ID phone allows you to:
• View the name and telephone number of a caller while you are on
the phone (Caller ID). the phone (Caller ID).
• Identify callers before you answer the phone.
• View the time and date of each incoming call.
• Record up to 40 Caller ID messages sequentially in each handset.
• Know who called while you are on the line or when you were away.
• Screen unwanted calls, eliminate harassment from annoying calls,
or to get prepared before answering a call. or to get prepared before answering a call.
IMPORTANT: In order to use all of the features of this telephone, you IMPORTANT: In order to use all of the features of this telephone, you
must subscribe to the standard Name/Number Caller ID Service must subscribe to the standard Name/Number Caller ID Service
to know who is calling . to know who is calling .

Connections and Setup

Connections and Setup

Before Your Begin

Before Your Begin
Parts Checklist Parts Checklist
Make sure your package includes the items shown here. Make sure your package includes the items shown here.
AC power AC power
Cordless handset Cordless handset
adaptor adaptor
charger charger
nna
Belt Belt
Handset Handset
clip clip
battery battery
Digital Security System Digital Security System
Your cordless phone uses a digital security system to protect against Your cordless phone uses a digital security system to protect against
false ringing, unauthorized access, and charges to your phone line. false ringing, unauthorized access, and charges to your phone line.
Important Installation Information Important Installation Information
• Never install telephone wiring during a lightning storm.
• Never install telephone jacks in wet locations unless the jack is
• Never touch non-insulated telephone wires or terminals, unless the
telephone line has been disconnected at the network interface. telephone line has been disconnected at the network interface.
• Use caution when installing or modifying telephone lines.
• Temporarily disconnect any equipment connected to the phone Temporarily disconnect any equipment connected to the phone
such as faxes, other phones, or modems. such as faxes, other phones, or modems.
Important Installation Guidelines Important Installation Guidelines
• Install near an electrical power outlet.
• Your handset charge cradle should be placed on a level surface Your handset charge cradle should be placed on a level surface
such as a desk or table top. such as a desk or table top.
• Avoid sources of noise, such as a window by a busy street, and
lighting. lighting.
This transmitter must not be This transmitter must not be
• Avoid heat sources, such as heating air ducts, heating appliances,
radiators, and direct sunlight. radiators, and direct sunlight.
• Avoid areas of excessive moisture or extremely low temperature.
• Avoid dusty locations.
• Avoid other cordless telephones or personal computers.
INSTALLATION NOTE: Certain other communications devices may also INSTALLATION NOTE: Certain other communications devices may also
use the DECT 6.0 frequency for communication, and, if not properly set, use the DECT 6.0 frequency for communication, and, if not properly set,
these devices may interfere with each other and/or your new these devices may interfere with each other and/or your new
telephone. If you are concerned with interference, please refer to the telephone. If you are concerned with interference, please refer to the
owner's manual for these devices on how to properly set channels to owner's manual for these devices on how to properly set channels to
avoid interference. avoid interference.

Installing the Handset Battery

Installing the Handset Battery
NOTE: You must connect the handset battery before use. NOTE: You must connect the handset battery before use.
T-2734 T-2734
that is compatible with this unit. that is compatible with this unit.
1. Locate battery and battery door which are packaged together 1. Locate battery and battery door which are packaged together
inside a plastic bag and are separate from the handset. inside a plastic bag and are separate from the handset.
2. Locate the battery compartment on the back of the handset. 2. Locate the battery compartment on the back of the handset.
3. Plug the battery pack cord into the jack inside the compartment. 3. Plug the battery pack cord into the jack inside the compartment.
NOTE: To ensure proper battery installation, the connector is keyed and NOTE: To ensure proper battery installation, the connector is keyed and
can be inserted only one way. can be inserted only one way.
4. Place the battery pack in recessed area of the handset battery 4. Place the battery pack in recessed area of the handset battery
compartment. compartment.
5. Close the battery compartment by pushing the door up until it 5. Close the battery compartment by pushing the door up until it
snaps into place. snaps into place.

Connecting the AC (Electrical) Power

Connecting the AC (Electrical) Power
Plug the power adaptor cord into the power jack on the back of the Plug the power adaptor cord into the power jack on the back of the
recharge cradle and the other end into an electrical outlet. The recharge cradle and the other end into an electrical outlet. The
charge indicator turns on to indicate the battery is charging when the charge indicator turns on to indicate the battery is charging when the
handset is on the cradle. handset is on the cradle.
on not properly charge the phone, battery performance is compromised. not properly charge the phone, battery performance is compromised.
damage use only the damage use only the T-8BXD power adaptor listed in the T-8BXD power adaptor listed in the
user's guide. This power adaptor is intended to be user's guide. This power adaptor is intended to be
et.
ay.
Class (Classe) 2 Power source Class (Classe) 2 Power source
lls,

Handset Layout

Handset Layout
Visual Ring Visual Ring
Indicator Indicator
Display Display
Softkeys Softkeys
(button) (button)
Headset Jack Headset Jack
Delete/Mute Delete/Mute
(button) (button)
Format/Redial Format/Redial
(button) (button)
Line (button) Line (button)
Talk (button) Talk (button)
VOL +/- (buttons) VOL +/- (buttons)
DIRECTORY DIRECTORY
End (button) End (button)
(button) (button)
CALL RECORD (button) CALL RECORD (button)
Cordless Cordless
Transfer/INT Transfer/INT
handset handset
# Pause # Pause
(button) (button)
(button) (button)
Flash/Exit Flash/Exit
Conf/Store Conf/Store (button) (button)
(button) (button)
Hold (button) Hold (button)
Handset Charge Cradle Handset Charge Cradle
ck is
charge indicator charge indicator
CAUTION: For servicing or replacement, you can purchase a CAUTION: For servicing or replacement, you can purchase a
ss the
suitable headset through service centre or retailer shop. suitable headset through service centre or retailer shop.

Telephone Setup

Telephone Setup
This handset has several programmable functions. This handset has several programmable functions.
N N OTE: Use the SELECT softkey button to go into the sub-menu, and use OTE: Use the SELECT softkey button to go into the sub-menu, and use
the Exit button to go to the previous menu. the Exit button to go to the previous menu.
Language Language
1. Press the MENU softkey once, LANGUAGE will show in the display. 1. Press the MENU softkey once, LANGUAGE will show in the display.
2. Press the SELECT softkey button to select. 2. Press the SELECT softkey button to select.
nd 3. Press the VOL ( + or -) button on the handset to select ENGLISH, 3. Press the VOL ( + or -) button on the handset to select ENGLISH,
FRANCAIS, or ESPANOL. The default is "ENGLISH". FRANCAIS, or ESPANOL. The default is "ENGLISH".
4. Press the SAVE softkey again to store the setting. 4. Press the SAVE softkey again to store the setting.
ances, Ring Melody Ring Melody
1. Press MENU softkey once, then press the VOL ( + or -) buttons until 1. Press MENU softkey once, then press the VOL ( + or -) buttons until
ure.
SOUND SETTING is displayed. SOUND SETTING is displayed.
2. Press SELECT softkey button to select. 2. Press SELECT softkey button to select.
3. Use the VOL ( + or -) buttons of the sub-menu until RING MELODY is 3. Use the VOL ( + or -) buttons of the sub-menu until RING MELODY is
displayed. displayed.
4. Press SELECT softkey button to select. 4. Press SELECT softkey button to select.
5. Use the VOL ( + or -) buttons to select the melody. A sample ringer 5. Use the VOL ( + or -) buttons to select the melody. A sample ringer
melody is generated when you scroll to individual ringer melodies. The melody is generated when you scroll to individual ringer melodies. The
6. Press the SAVE softkey button to save. 6. Press the SAVE softkey button to save.

Ring Volume

Ring Volume
1. Press MENU softkey once, then press the VOL (+ or -) buttons until 1. Press MENU softkey once, then press the VOL (+ or -) buttons until
SOUND SETTING is displayed. SOUND SETTING is displayed.
2. Press SELECT softkey button to select. 2. Press SELECT softkey button to select.
3. Use the VOL ( + or -) buttons of the sub-menu until RING VOLUME is 3. Use the VOL ( + or -) buttons of the sub-menu until RING VOLUME is
displayed. displayed.
4. Press SELECT softkey button to select. 4. Press SELECT softkey button to select.
5. Use the VOL (+ or -) buttons to select the ring volume. The visual ring 5. Use the VOL (+ or -) buttons to select the ring volume. The visual ring
6. Press the SAVE softkey button to save. 6. Press the SAVE softkey button to save.
Auto Talk Auto Talk
1. Press MENU softkey once, then press the VOL (+ or -) buttons until 1. Press MENU softkey once, then press the VOL (+ or -) buttons until
PHONE SETTING is displayed. PHONE SETTING is displayed.
2. Press SELECT softkey button to select. 2. Press SELECT softkey button to select.
3. Use the VOL (+ or -) buttons of the sub-menu until AUTO T 3. Use the VOL (+ or -) buttons of the sub-menu until AUTO TALK is
displayed. displayed.
4. Press SELECT softkey button to select. 4. Press SELECT softkey button to select.
5. Use the VOL (+ or -) buttons to select ON or OFF. Select ON to let the 5. Use the VOL (+ or -) buttons to select ON or OFF. Select ON to let the
handset pick up the call by lifting it up from the cradle. handset pick up the call by lifting it up from the cradle.
6. Press the SAVE softkey button to save. 6. Press the SAVE softkey button to save.
Contrast Contrast
1. Press MENU softkey once, then press the VOL (+ or -) buttons until 1. Press MENU softkey once, then press the VOL (+ or -) buttons until
PHONE SETTING is displayed. PHONE SETTING is displayed.
2. Press SELECT softkey button to select. 2. Press SELECT softkey button to select.
3. Use the VOL ( + or -) buttons of the sub-menu until CONTRAST is 3. Use the VOL ( + or -) buttons of the sub-menu until CONTRAST is
displayed. displayed.
4. Press SELECT softkey button to select 4. Press SELECT softkey button to select
5. Use the VOL ( + or -) buttons to select the LCD contrast level. 5. Use the VOL ( + or -) buttons to select the LCD contrast level.
6. Press the SAVE softkey button to save. 6. Press the SAVE softkey button to save.
Area Code Area Code
1. Press 1. Press MENU softkey once, then press the VOL (+ or -) buttons until MENU softkey once, then press the VOL (+ or -) buttons until
PHONE SETTING is displayed. PHONE SETTING is displayed.
2. Press SELECT softkey button to select. 2. Press SELECT softkey button to select.
3. Use the VOL ( + or -) buttons of the sub-menu until AREA CODE is 3. Use the VOL ( + or -) buttons of the sub-menu until AREA CODE is
displayed. displayed.
4. Press SELECT softkey button to select 4. Press SELECT softkey button to select
5. Use the number pad to enter your three digit area code. The default is 5. Use the number pad to enter your three digit area code. The default is
"000". "---". 0
6. Press the SAVE softkey button to store the setting. 6. Press the SAVE softkey button to store the setting.
Regional Code Regional Code
1. Press Menu softkey once, then press the VOL ( + or -) buttons until 1. Press Menu softkey once, then press the VOL ( + or -) buttons until
PHONE SETTING is displayed. PHONE SETTING is displayed.
2. Press Select softkey to select. 2. Press Select softkey to select.
Conference Call Conference Call
3. Use the VOL ( + or -) buttons of the sub-menu until REGIONAL 3. Use the VOL ( + or -) buttons of the sub-menu until REGIONAL This feature allows you to have a 3-way conversation using any This feature allows you to have a 3-way conversation using any
CODE is displayed. CODE is displayed. combination of 2 lines (or a line and an intercom call). combination of 2 lines (or a line and an intercom call).
4. Press Select softkey to select 4. Press Select softkey to select
To connect and conference: To connect and conference:
5. Use the number pad to enter your three digit area code. The 5. Use the number pad to enter your three digit area code. The
1. To make a call, select the line you want and dial the number (or make 1. To make a call, select the line you want and dial the number (or make
default is "---". default is "---".
an intercom call). If you already have someone on the line (or already in an intercom call). If you already have someone on the line (or already in
6. Press the Select softkey to store the setting. 6. Press the Select softkey to store the setting.
intercom call), skip to Step 2. intercom call), skip to Step 2.
2. Press the Hold button to place the call on hold. 2. Press the Hold button to place the call on hold.
Clear All Memory Clear All Memory
3. Select another line and dial another number (or you can make an 3. Select another line and dial another number (or you can make an
1. Press MENU softkey once, then press the VOL (+ or -) buttons until 1. Press MENU softkey once, then press the VOL (+ or -) buttons until
intercom call if the call on hold before is not an intercom call). intercom call).
PHONE SETTING is displayed. PHONE SETTING is displayed.
4. Press the Conf button. 4. Press the Conf button.
2. Press SELECT softkey button to select. 2. Press SELECT softkey button to select.
5. Speak to both parties. 5. Speak to both parties.
3. Use the VOL (+ or -) buttons of the sub-menu until CLEAR ALL MEM 3. Use the VOL (+ or -) buttons of the sub-menu until CLEAR ALL MEM
NOTE: If you have more than one line (including intercom call) on hold, NOTE: If you have more than one line (including intercom call) on hold,
is displayed. is displayed.
4. Press SELECT softkey button to select 4. Press SELECT softkey button to select
5. Use the VOL (+ or -) buttons to select YES. 5. Use the VOL (+ or -) buttons to select YES.
which you want to conference. Then, you can select another party when which you want to conference. Then, you can select another party when
6. Press the SAVE softkey button to clear all the records in the 6. Press the SAVE softkey button to clear all the records in the
you have pressed the Conf button. you have pressed the Conf button.
phonebook and CID memories. phonebook and CID memories.
To disconnect one party:
Load Default Load Default
To disconnect one party:
Select the line (by pressing
1. Press MENU softkey once, then press the VOL (+ or -) buttons until 1. Press MENU softkey once, then press the VOL (+ or -) buttons until
Select the line (by pressing the Line button and then together with the
for the person you want to continue speaking with, and
PHONE SETTING is displayed. PHONE SETTING is displayed.
line number) for the person you want to continue speaking with, and
the other party will automatically disconnected.
2. Press SELECT softkey button to select. 2. Press SELECT softkey button to select.
the other party will automatically disconnected.
3. Use the VOL (+ or -) buttons of the sub-menu until LOAD DEFAULT 3. Use the VOL (+ or -) buttons of the sub-menu until LOAD DEFAULT To disconnect both parties:
To disconnect both parties:
MEM is displayed. MEM is displayed.
Hang up the handset by pressing the End button.
Hang up the handset by pressing the End button.
4. Press SAVE softkey to reset to the default settings. 4. Press SAVE softkey to reset to the default settings.

Volume Adjust

Set Time Set Time
then disconnect from each party individually.
Adjust the receiver volume by pressing the VOL (+ or -) buttons when
The time cannot be set manually in the handset, only at the base. Any The time cannot be set manually in the handset, only at the base. Any
update to the base time will be automatically sent to the handset. update to the base time will be automatically sent to the handset. Volume Adjust
VOL ( + or -) buttons adjusts the receiver volume by one level.
Adjust the receiver volume by pressing the VOL (+ or -) buttons when

Speakerphone Mode

Registration Registration
VOL ( + or -) buttons adjusts the receiver volume by one level.
1. During a call, press the Talk button to change to speakerphone mode.
A cordless handset will not operate until it is registered to the base. A cordless handset will not operate until it is registered to the base.
2. Press Talk again to change it back to handset mode.
During the registration process, keep the handset near the base. Only During the registration process, keep the handset near the base. Only
Speakerphone Mode
one cordless handset can be registered to each base. one cordless handset can be registered to each base.
Hold
1. During a call, press the Talk button to change to speakerphone mode.
NOTE: If a handset has not been registered to the base, then the display NOTE: If a handset has not been registered to the base, then the display
2. Press Talk again to change it back to handset mode. 1. Press the Hold button to put a call on hold.
will show NOT REG once the handset has been activated. Follow the will show NOT REG once the handset has been activated. Follow the
2. To take a call o hold, press the Hold button again.
below steps to start the registration. below steps to start the registration.
Hold
Transfer
1. Press the Hold button to put a call on hold.
Register Register
You can transfer the call to another extension.
2. To take a call o hold, press the Hold button again.
1. Press and hold the Page button on base for about 2 seconds until 1. Press and hold the Page button on base for about 2 seconds until 1. Press the Int/Transfer button when it is in TALK mode.
3. To switch a call on hold from the base to the cordless handset, press
the BS shows the Page sub-menu, select "Register Handset" and press
the BS shows the Page sub-menu, select "Register Handset" and press 2. Key in the extension ID number you want to transfer to.
the Hold button on the cordless handset.
3. The desired extension will ring, and your handset will go back to
2. Press Menu button to enter the Main Menu, then using the VOL 2. Press Menu button to enter the Main Menu, then using the VOL Transfer
standby mode.
(- or +) button to scroll to Register. (- or +) button to scroll to Register.
You can transfer the call to another extension.
NOTE: There is another way to transfer the call. You can hold the call
3. Press REG Soft key . The screen displays Searching. 3. Press REG Soft key . The screen displays Searching.
1. Press the Int/Transfer button when it is in T rst and then press transfer button, the display will show 2 selection:
4. START HANDSET REG displays to indicate the base is now in 4. START HANDSET REG displays to indicate the base is now in
Intercom and Attend Transfer, use VOL(- or +) button to select the 2. ey in the extension ID number you want to transfer to.
registration mode. registration mode.
"Attend Transfer" and press Select soft key to con rm, then follow by
3. The desired extension will ring, and your handset will go back to
5. If the Handset found the base, it will show the base numbers such as: 5. If the Handset found the base, it will show the base numbers such as:
the extension number enter, you can make an intercom call with the
standby mode.
00002-04444H. 00002-04444H.
extension which you enter, the line will be on hold until you end the
Flash
6. Press REG softkey again, the display shows "PIN:", 6. Press REG softkey again, the display shows "PIN:", intercom call by press END button, it will transfer to the extension
7. Using the dial pads to enter Pin code, default is 1590. 7. Using the dial pads to enter Pin code, default is 1590. which you intercom.
On talk mode press Flash softkey to reset the dialed numbers and
allow the user to dial the other numbers. Flash
On talk mode press Flash softkey to reset the dialed numbers and
tone and return to the main menu.. tone and return to the main menu..
allow the user to dial the other numbers.
Call Timer
or or
Call Timer
If the registration is failed (i.e. timeout), the handset emits an error tone If the registration is failed (i.e. timeout), the handset emits an error tone After you press Talk or Line plus number button to select the line on the
After you enter talk mode
and return to show NOT REG. and return to show NOT REG. cordless handset, the built-in call timer shows in the display and begins
counting the length of time of the call. shows in the display and begins counting the length of time of the call.
NOTE: If there is cordless handset registered to the BS, press and hold NOTE: If there is cordless handset registered to the BS, press and hold
Out of Range
Page button can enter "Page the Handset", "Page all stations" and " Page button can enter "Page the Handset", "Page all stations" and "
Out of Range
Deregister Handset" selection menu, but no "Register Handset" selection. Deregister Handset" selection menu, but no "Register Handset" selection.
If the handset is too far from the base (out of range) you may
If the handset is too far from the base (out of range) you may
If you want to register the other handset, you should select "Deregister If you want to register the other handset, you should select "Deregister
experience static or noise. Move closer to the base or handset will
experience static or noise. Move closer to the base or handset will
Handset" to de-register the current handset, and then repeat the register Handset" to de-register the current handset, and then repeat the register
automatically hang up if it is kept out of range for 30 seconds.
automatically hang up if it is kept out of range for 30 seconds.
steps 1~9 to register the other handset. steps 1~9 to register the other handset.
Battery Low
Basic Operation Basic Operation Battery Low
If the handset battery is low, the unit will emit the alert tone and show
Visual Indicators Visual Indicators
If the handset battery is low, the unit will emit the alert tone and show
BATTERY LOW in the display to remind you that the battery needs
CHARGE Indicator on the Cradle CHARGE Indicator on the Cradle BATTERY LOW in the display to remind you that the battery needs
charging. If the battery voltage is very low, the handset will
The CHARGE indicator is lit when the handset is charging.Ring Indicator The CHARGE indicator is lit when the handset is charging.Ring Indicator charging. If the battery voltage is very low, the handset will
automatically shut down. Place handset in the charge cradle to
on Handset on Handset automatically shut down. Place handset in the charge cradle to
recharge battery
recharge battery

Intercom Operation

the base is paging the cordless handset. the base is paging the cordless handset.
Answering a Call Answering a Call Intercom Operation Answering an Intercom Call
1. Press the Talk button on the handset. 1. Press the Talk button on the handset. (The base displays CORDLESS
Answering an Intercom Call 1. Press the Int/Transfer button or Talk button.
H/S IN USE).
1. Press the Int/Transfer button or Talk button.
charge cradle to hang up.
Receiving an Incoming Telephone Call During an
charge cradle to hang up.
Intercom Call
Receiving an Incoming Telephone Call During an
Intercom Call
Making a Call Making a Call
During an intercom call, if you receive a telephone call, you will hear an
1. Press the Talk button to access an available line automatically, 1. Press the Talk button to access an available line automatically, alert tone. To answer the incoming call, press the Hold button to place
During an intercom call, if you receive a telephone call, you will hear an
your intercom call on hold or press End button to drop the intercom
-OR- -OR-
alert tone. To answer the incoming call, press the Hold button to place
If you want to select a desired line, press Line button plus a number If you want to select a desired line, press Line button plus a number call, then press Talk to answer the telephone call.
your intercom call on hold or press End or Int/Transfer button to drop
button (1-8) to select the desired line. Line number is displayed at top button (1-8) to select the desired line. Line number is displayed at top
the intercom call, then press Talk to answer the telephone call.
Using Intercom with a Telephone Call
of display. of display.
Using Intercom with a Telephone Call
2. 2. Wait for a dial tone then dial the desired number. Dial the desired number and then press talk button again to dial out. r r . r
During a telephone call, you can use the intercom function to page
another extension unit and set up a private (2-way) intercom
During a telephone call, you can use the intercom function to page
charge cradle, to hang up. charge cradle, to hang up. conversation with another user while the telephone call is placed on
another extension unit and set up a private (2-way) intercom
NOTE: If the line you selected is occupied by other users, the message NOTE: If the line you selected is occupied by other users, you will hear hold. Or, you can create a 3-way conversation between the telephone
conversation with another user while the telephone call is placed on
an error tone. To select another line, press the Line button plus the
caller, the cordless handset and other extensions.
hold. Or, you can create a 3-way conversation between the telephone
number button again.
selection of this line. If you want to select another line, press the Line
caller, the cordless handset and other extensions.
Note: After you put the current line on hold, press INT/Transfer button
button plus the number button again.
will show the 2 selection: Intercom and Attend Transfer, use
VOL(- or +) button to select the "Intercom" and press Select soft key
Redial Redial
to con rm, then follow by the extension number enter, you can make
To quickly redial from any of the last 10 numbers you have dialed: To quickly redial from any of the last 10 numbers you have dialed:
an intercom call with the extension which you enter.
1. Press the Format/Redial button. 1. Press the Talk button to access an available line or select your
preferred line. 2. Use the VOL (+ or -) to scroll to the desired number.
3. Press Talk button to dial the number automatically. 2. Press the Format/Redial button.
3. Use the VOL (+ or -) to scroll to the desired number. -or-
4. Press SELECT softkey to dial the number automatically. Press Line button plus a number button (1-8) to select the desired
5. Press the Format/Redial button. line; number is dialed automatically.
6. Use the VOL (+ or -) to scroll to the desired number.
7. Press the Talk button to access an available line or select your
preferred line; number is dialed automatically. y y . y
Take1 or Take2 soft key)
r) er)
8
e e o
on the cordless handset, the built-in call timer