Martor SECUMAX OPTICUT 436 Technical Data Sheet

TECHNICAL DATA SHEET
SECUMAX OPTICUT
NO. 436
SAFETY KNIFE WITH CONCEALED BLADE, PLASTIC MATERIAL GUIDE AND METAL GLIDE FOOT.
Order No. 436.00
Glides over the material. And right through the middle.
For „pull" cutting.
You are looking for a film and foam cutter that effortlessly
cuts harder and stronger film? One that's not afraid of stub-
born foam? You have found the best possible solution with
the SECUMAX OPTICUT. Its Teflon-coated, metal foot makes
it both extremely abrasion resistant and easy to slide. Glide
with jam less ease through whatever material you want to
cut. Ideal for „pull" cutting.
4-times usable blade
Before you need to change your blade, you have the option
of rotating it multiple times. Four times to be precise. In this
way, you can get so much more out of your blade. Practical
for you, favourable for your company!
Work ergonomically
It's easy to work ergonomically with the SECUMAX OPTICUT.
Your fingers will be delighted with the sizable grip, your
Technical data sheet › SECUMAX OPTICUT

Safety technology

Concealed blade – a maximum degree of
safety
The SECUMAX OPTICUT blade is not an
open one, but is hidden from people and
goods. This provides you with the highest
degree of safety from cut injuries and from
damage to goods.
thumb with the additional curving at the front of the handle.
Glide cutting couldn't be more comfortable.
Cut clean
Whether cutting foam or film, the bendable plastic materi-
al-guide reliably stops material jamming in front of the blade.
The same guide simultaneously protects your fingers from
blade contact.
Extremely robust
The glide foot, made of Teflon-coated metal, is both durable
and robust. The foot and the similarly robust handle are firm-
ly screwed together; you will be sure to enjoy your cutting
tool for an extended period of time.
Easy blade change
Blade Change is performed using the small, rotating bracket
found on the cutter side. Swing, press and release the guide
foot. The blade is housed within the foot. Replace or rotate
the blade before pushing everything back into place.
19.10.2018 01/04