During A Malfunction - KYMCO Many 110 EV Series User Manual

11. During a malfunction

1. When the Main Switch is ON, the meter still shows a
service code, even if the previous problem is solved. At
this time, restart the Main Switch to clear the service
code.
2. If the scooter is broken down when you ride, bring your
scooter to a Kymco authorized shop, Service Center, or
Kymco EV Scooter Shop for inspection.
3. To avoid personal injury and scooter damage, no
personnel other than the Kymco authorized personnel
should not inspect and repair the scooter.
If the motor does not operate
 Turn the Main Switch to "ON" (refer to the main switch
positions)
 Is the Core battery or Personal battery fully charged (refer
to the meter battery indication)?
 Is the acceleration handlebar returned to the original
position (refer to the speed control)
 If the Main Switch is turned to "OFF," turn it to "ON"
again (refer to the main switch positions)
 Check the service code and indicator displayed on the
meter panel.
If a malfunction occurs, the motor stops during riding
 Is the battery fully charged (refer to the meter section)?
(Make sure the bars displayed on the meter. Charge the
battery if necessary)
 Check the fuse.
If a service code appears, go to a Kymco authorized shop,
Kymco EV Scooter shop, or Service Center for repairing.
-53-
Note