Safety During Transport, Assembly And Maintenance - KYMCO SUPER 8 User Manual

Danger due to unintentional movement!
• Always turn the scooter off using the keyswitch if you:
- want to get on or off
- intend to stop for long periods
- are putting the scooter away.
1.5

Safety during transport, assembly and maintenance

If the scooter is transported in the vehicle when fully
assembled:
- no persons may sit on the scooter during loading!
- no persons may sit on the scooter during transport!
Clamping and crushing hazard!
Increased hazards due to clamping or crushing result due to the
high component weight (such as batteries) during preparation
for transport and maintenance work.
• Always carry out any work to be done with great care.
• Always try to get help from a second person, especially when
stowing parts for transport.
• Only carry out any work described if you are used to working
with the tools required.
• Only carry out work using suitable tools.
Injury hazard due to improper assembly!
• Ensure that all components in the Scooter have been
correctly assembled.
• After assembly, check that all locking devices are holding
correctly.
Accident hazard due to incorrectly bolted connections!
• If bolted connections have self-locking nuts, ensure
that these are replaced when reassembling.
• Do not replace self-locking nuts with normal nuts.
• If bolted connections have lock washers, check lock
washers when reassembling and replace if necessary.
Safety information
11