KYMCO Many 110 EV Series User Manual page 50

How to use the Personal/Shared battery
1. You must brace the main stand up on level and flat
ground.
2. Turn on the Main Switch (Fig. 1) and press the Battery
Cartridge Switch to open the Smart energy bay.
3. Remove the Personal/Shared battery from the Smart
energy bay, and place it in the battery charging dock (Fig.
2).
4. Plug the charger into the AC 110v outlet (Fig. 3).
5. Connect the output cable of the charger to the battery
charging dock (Fig. 2).
6. The charger indicator lights up in yellow (Fig. 4) which
means charging is in progress. The LED indicator of the
Personal/Shared battery (Fig. 5) is displayed based on
the battery capacity*. (The charging time varies
depending on the battery condition and ambient
temperature.)
7. When the charging indicator changes from yellow to
green→illuminated in green, it means the battery is
charged completely.
Actions to be taken after charging:
A. Remove the AC 110v power cable.
B. Remove the battery and battery charging dock.
C. Place the battery into the Smart energy bay on the
scooter.
* The LED indicator above the battery
Green: The capacity is about 75~100%
Yellow: The capacity is about 36~74%
Red: The capacity is about 0~35%
-43-