Dialog Semiconductor SmartBond DA14585 Quick Start Manual

Dear customer,
Thank you for buying this
IoT Multi Sensor Development Kit
Quick Start Guide
1. Download the Dialog IoT Sensors mobile application
from iTunes or Google Play
2. Insert the batteries in the IoT Multi Sensor Add-on
Board
3. Turn on the IoT Multi Sensor Add-on Board
by moving the switch
The device will advertise for 60 seconds. During this time the LED
will blink. After 60 seconds the device will enter sleep mode and
will only start advertising upon movement detection.
4. Open the app, select your device, start your experience
5. Enable Cloud functionality (optional)
(Internet availability is required)
1 Go to Cloud Settings
2 Enable Cloud
3 Create New Account (1st time only)
4 Enter your email address and press send
5 Make sure IoT Apps are enabled
www.dialog-semiconductor.com/bluetoothlowenergy
SmartBond™ DA14585
1
2
3
4
5