Table of Contents
Advertisement
Mode Screens
The different mode screens are as shown below (default setup).
Display Parameters
When viewing data Main screen 1 or 2, the user can configure the display to show either four or two parameters
simultaneously.
If four parameters are displayed at once, a two digit code is shown next to each section of channel data. A list of all the
parameter codes used by the MF Display can be found on page 06 - MFD Display parameter tables.
If only two parameters are displayed, then the complete description of the channel will be displayed alongside the value,
as shown above.
The setting to change between parameter configurations can be found in CONFIG DISPLAY > NUM OF PARAMS.
https://racelogic.support/01VBOX_Automotive/06Displays/Multi-Function_Display_(MFD)/
8
Advertisement
Table of Contents
