Emotiva XPA HC-1 User Manual page 4

The power cable for the XPA HC-1 amplifier should be unplugged from the outlet during severe electrical storms,
or when unused for a long period of time.
Only replace the fuse(s) in the XPA HC-1 amplifier with fuse(s) of proper value and voltage rating.
The XPA HC-1 should only be cleaned as directed in the manual. Avoid spraying liquids directly onto the unit and
!
NEVER spray liquids into the vents. Care should be taken so that small objects do not fall into the inside of the
unit.
You should seek service for your XPA HC-1 amplifier by qualified service personnel if any of the following occur:
1. The power-supply cord or the plug has been damaged.
2. Objects or liquid have fallen or spilled into the vents.
3. The unit has been exposed to rain.
4. The unit exhibits a marked change in performance.
5. The unit has been dropped, or its enclosure or chassis is damaged.
NOTE: TO COMPLETELY DISCONNECT THE XPA HC-1 AMPLIFIER FROM THE AC POWER MAINS, DISCONNECT THE
AC POWER CORD FROM THE AC RECEPTACLE.
NOTE: THE POWER CORD ON THE XPA HC-1 AMPLIFIER MUST REMAIN READILY ACCESSIBLE AT ALL TIMES.
CAUTION
CAUTION: TO REDUCE THE RISK
OF ELECTRICAL SHOCK, DO
NOT REMOVE COVER. NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.