Process-Technical Settings - Siemens SICAM AK Manual

Redundancy via CP-6010
Note
If you have a different configuration in SICAM AK, you must parameterize the corresponding system
elements in the topology.
2.5.2.2

Process-Technical Settings

For the functionality "global switchover", you must create the control and return information
signals in the Process Technique.
Create the signals in the Process Technique for both SICAM AK A and SICAM AK B as
shown in the figure below.
You can modify the control and return information signals in the Process Technique of
SICAM AK. In Appendix A,
values required for the different system elements in SICAM AK.
Note
The following settings in SICAM AK A show an example for the "global switchover".
110
Configuration of SICAM AK and
Unrestricted
CP-6010, you find all the IOA
SICAM RTUs, SICAM AK Redundancy
Edition 10.2016, DC2-026-2.07