2.6.2.3
Settings for Priority Signals
Create priority signals which will act as the output signals in the logic as follows. The signal
name must be numerical.
2.6.2.3.1
Output Link of CAEx plus
After creating the priority signals, select LNK_CAExplus and make necessary changes for
configuring as CAExplus output link.
Select the parameter
Select the parameter
All other signals will be updated automatically.
SICAM RTUs, SICAM AK Redundancy
DC2-026-2.07, Edition 10.2016
as
IEC-standard
Lk_Cat
as
Activated
via the relevant pull-down menu.
Lk_Prep
Unrestricted
Redundancy via CP-6010
via the relevant pull-down menu.
121