Sicam Ak Redundancy Without Key Switch - Siemens SICAM AK Manual

Redundancy via CP-6010
2.2.4

SICAM AK Redundancy without Key Switch

The SICAM AK Redundancy system provides you an option to use the system without key
switch module. If the key switch module is not used, you need to set the availability of the key
switch module to
If the key switch module is not used, the system operates only with the mode of operation
AUTO.
The following diagram shows the SICAM AK redundancy without key switch module.
92
No in the user interface (refer to section 2.4.2.3.1,
Unrestricted
IP Configuration).
SICAM RTUs, SICAM AK Redundancy
Edition 10.2016, DC2-026-2.07