Installing 2 Nd Power Supply - Siemens SICAM AK Manual

1.5.2.3.2 Installing 2
The second power supply is installed in the upper left slot.
nd
2 power supply
Therefore the CM-5680 connection p.c.b. and socket connector must be installed before. The
same parts as used for the first power supply have to be used.
Designation
CM-5680 supply/signaling PS-562x
Installing Connection P.C.B. CM-5680
•
Open the screws of the plate that covers the slot for the second power supply
•
Install the plates on which connection p.c.b. and socket connector will be mounted
•
Screw the socket connector from inside the mounting rack to the plates
•
Screw the connection p.c.b. from the rear side of the mounting rack to the plates
CM-2833 rear side
SICAM RTUs, SICAM AK Redundancy
DC2-026-2.07, Edition 10.2016
nd
Power Supply
RY RY RY RY
PS-5620
ER ER ER ER
ESD
EARTH
FACILITY
SICAM
RY RY RY RY RY RY RY RY RY RY RY RY RY
ER ER ER ER ER ER ER ER ER ER ER ER ER
Item-Number/MLFB
BC5-680
6MF10130FG800AA0
CM-5680
Plate
Socket connector
Plate
Unrestricted
Redundancy via SCA-RS
st
1 power supply
PS-5620
73