Caex Plus Link; Settings For Communication Board Failure - Siemens SICAM AK Manual

Redundancy via CP-6010
2.6.2.1.2

CAEx plus Link

After creating the signals, select LNK_CAExplus and make the following changes.
Select the parameter
Select the parameter
All the other signals will be updated automatically.
2.6.2.2

Settings for Communication Board Failure

For the signal
Communication fault
After copying, update the
120
as IEC-standard
Lk_Cat
as Activated
Lk_Prep
Communication board
parameters.
and
IOA Error_type
Unrestricted
via the relevant pull-down menu.
via the relevant pull-down menu.
failure, you can copy the already configured
in the LNK_1703_SYS.
SICAM RTUs, SICAM AK Redundancy
Edition 10.2016, DC2-026-2.07