Sewing preparations
Sewing preparations
ng
prepar
Sewing preparations
Foot control
LED sewing light
Slide-on table
10
Sewing speed control
⦁
control the sewing speed by pressing the foot control
Self storing cord
⦁
wind the cable around the spool
⦁
insert the plug into the groove provided
While sewing
⦁
unwind the cable
The LED sewing light illuminates the sewing area and has a long product life.
DANGER!
Please note that a defective sewing light must ONLY be
replaced by an authorized technician.
The sewing computer must be taken to an authorized BERNINA
dealer!
The slide-on table increases the sewing surface.
Attaching the slide-on table
⦁
raise needle and presser foot
⦁
slide over free-arm to the right until it engages
Removing the slide-on table
⦁
raise needle and presser foot
⦁
press button down and pull off slide-on table to the left