Installation In A Double-Hung Sash Window - Gree GPC12AL-K5NNA3A Service Manual

Service Manual

9.3 Installation in a double-hung sash window

1. Connect the rain guards to the insect guard net.(As show in Fig.10)
Insert all three projections on each rain guard into the holes in the insect guard net.
Side "A" will now be at the top, as indicated in the diagram.
2. Attach the guard combined above to the window panel.(As show in Fig.11)
3XVK WKH LQVHFW JXDUG QHW ¿UPO\ WR HQVXUH WKDW LWV IRXU SURMHFWLRQV ¿W LQWR WKH KROHV LQ
Side "A" will now be at the top, as indicated in the diagram.
Insect guard net
Projec-
tion
3. Cut the foam seal A to the proper length and attach it to the window stool.(As show in Fig.12)
4. Attach the window panel to the window stool.
Make sure that the exhaust cover is attached to the window panel.
Inner width of the window:20.5"(520mm)
Use the window panel.
The window panel cannot be installed in windows less than 20.5" (520mm) wide,as you
will be unable to shut the exhaust cover.
(1) Open the window sash and place the window panel on the window sill. (As show in Fig.13)
(2) Secure the window panel to the window stool with 2 screws.(As show in Fig.14)
Exhaust cover
Fig.13
Inner width of the window:20.5" (520mm)- 38.5" (980mm)
Use the window panel and the adjustment panel.
(1) Open the window sash and place the window panel on the window sill.
 6OLGH WKH DGMXVWPHQW SDQHO WR ¿W WKH ZLQGRZ IUDPH ZLGWK(As show in Fig.15)
(3) Secure the window panel to the sill with 3 screws.(As show in Fig.16)
Adjustment panel
Fig.15
Inner width of the window:38.5" (980mm) - 59" (1500mm)
Use the window panel, the adjustment panel and the extension panel.
(1) Open the window sash and place the window panel on the window sill.
 6OLGH WKH DGMXVWPHQW DQG H[WHQVLRQ SDQHOV WR ¿W WKH ZLQGRZ IUDPH ZLGWK(As show in Fig.17)
(3) Secure the window panel to the window sill with 4 screws.(As show in Fig.18)
Extension panel
Maintenance
Hole
Rain guard
"A"
Fig.10
Window panel
Cut
Adjustment panel
Fig.17
Projection
"A" Window panel
Fig.11
20.5"
Fig.14
20.5" - 38.5"
38.5" - 59"
Foam seal A
Fig.12
Fig.16
Fig.18
43