Using Zds; Select The Emulator; Figure 3-1 New Project Dialog Box - ZiLOG Z86L99 ICEBOX User Manual

Using ZDS

USING ZDS
This emulator is fully compatible with ZiLOG Developer Studio (ZDS) software. The fol-
lowing steps briefly describe the procedures necessary to setup and create projects with the
Z86L9900100ZEM emulator. A summary of the emulator's available debug windows is also
included at the end of this chapter.
For more detailed information on using ZDS, refer to the ZDS User Manual (in PDF format)
located on the installation CD-ROM, or download the latest information from our web site at
www.zilog.com.
S E
ELECT THE MULATOR
To select the emulator and create a new project, perform the following steps:
1. Open ZDS by selecting Start>Programs>Zilog Developer Studio> ZDS.
2. Choose New Project from the File menu. The New Project dialog box appears.
If the project has already been created, select
N :
OTE
following steps for the
F 3-1. N
IGURE EW
3. Select Application in the Selection by field.
4. Select IR Remote from the Master pop-up list.
5. Select a microcontroller from the IR Remote family in the Project Target pop-up list.
6. Select Z86L9900100ZEM in the Emulator pop-up list.
3–2
ZiLOG MCU Database
P
ROJECT DIALOG BOX
Target Project
from the
dialog box. See Figure 3-1.
Overview
menu and perform the
UM005100-IRR0400