Camera Mount Section (Inner Base) And Connectors 2 - Sony CA-901K Operation Manual

Camera Mount Section (Inner Base) and Connectors 2

Carrying handle
5 Number plate
holder
1 Camera mount (VCT-14 tripod attachment)
Fit the camera. Slides to the front and rear.
2 Slide lock knob
Locks the camera mount 1 so it does not slide.
Turn counterclockwise to lock the camera mount at the
far rear, and clockwise to lock it at the very front.
3 SCRIPT (script light) switch
Turns the script light connected to the SCRIPT
connector 4 on and off.
Camera mount section and connectors 2
4 SCRIPT connector (4-pin)
Supplies power (maximum 5 W) for a script light.
5 Number plate holder
Fit the supplied number plates.
1 Camera mount
2 Slide lock knob
3 SCRIPT switch
4 SCRIPT connector
5(E)