Selecting The Play Mode (Single Play/Repeat Play) - Sony MZ-B10 Operating Instructions (primary manual) Operating Instructions Manual

1
While playing, press SPEED
CONTROL + or – while the recorder
is playing.
Playback speeds up when you press
the SPEED CONTROL + button and
slows down when you press the –
button. Select the desired playback
speed while listening to the material.
"DPC" appears in the display when
the playback speed is changed.
0%
–50%
"DPC" appears when playback
speed is changed.
To switch to normal playback
Press N • PLAY or SPEED CONTROL
+ or – to select 0%.
z
• Once you open the lid, the playback speed
reverts to the normal speed (0%).
• While using this function, you can pause
playback or locate track marks by pressing the
X • PAUSE, . • REVIEW • AMS, or >
• CUE • AMS button.
+100%
Notes
• When using this function, you may hear noise
or an echo in the playback.
• When you change the playback speed, the
sound mode setting ("SOUND 1" or "SOUND
2") will stop functioning. When you change
the playback speed back to normal (0%), the
sound mode setting will begin functioning
again.
Selecting the play
mode (Single Play/
Repeat Play)
You can select single play, single repeat,
or all repeat.
. • REVIEW •
AMS, > • CUE
• AMS
1
While playing, press MENU/ENTER.
2
Press . or > until "PLAY
MODE" appears in the display, and
then press MENU/ENTER.
3
Press . or > repeatedly until
"Normal" or "1 Track" appears in the
display, and then press MENU/
.
ENTER
Normal: All tracks are played once.
1 Track: A single track is played
once.
MENU/
ENTER
continued
27