Using House Current - Sony MZ-B10 Operating Instructions (primary manual) Operating Instructions Manual

Using house current

1
Attach the supplied clamp filter to the
optional AC power adaptor (see
page 8).
2
Connect the AC power adaptor to DC
IN 3V.
3
Connect the AC power adaptor to the
wall outlet.
To wall outlet
AC power adaptor
To DC IN 3V
Notes
• Check that the REC button is not depressed
before connecting the AC power adaptor. If a
disc is inserted and the button is depressed,
recording may start when you connect the AC
power adaptor. If the REC button is depressed,
be sure to remove the disc before you connect
the AC power adaptor.
• For use in your house: Use the AC power
adaptor (not supplied). Do not use an AC
power adaptor other than the recommended
one since it may cause the recorder to
malfunction.
• There are regional differences in AC-E30HG
specifications. For this reason, you should
verify that the power requirements and plug
configuration are appropriate for your area
before you purchase the recorder.
• Connect the AC power adaptor to an easily
accessible AC outlet. Should you notice an
abnormality in the AC power adaptor,
disconnect it from the AC outlet immediately.
Polarity of the
plug
43