To
Pause
Cue to the current track or a
previous track
1)
Cue to the next track
Go backwards or forward
while playing
Search for a point in a track
while viewing the elapsed
time. (Time search)
Search for a specific track
while viewing track numbers
or track names. (Index search)
Remove the MD
1)
If you press . • REVIEW • AMS during the first track of the disc, the recorder goes to the beginning
of the last track on the disc.
If you press > • CUE • AMS during the last track of the disc, the recorder goes to the beginning of
2)
the first track on the disc.
3)
Once you open the lid, the point to start play will change to the beginning of the first track.
If the play does not start
Make sure the recorder is not locked (page 12).
z
Playback will switch automatically between
stereo and monaural according to the sound
source.
Notes
• The sound may skip during playback when the
recorder is exposed to continuous vibration,
such as while jogging.
• If the power supply is disrupted (i.e. the
batteries are removed or become exhausted or
the optional AC power adaptor is
disconnected) when the recorder is operating,
the lid may not open until the power is
restored and the x • STOP button is pressed.
Operation on the recorder
Press X • PAUSE. Press X • PAUSE again to resume
play.
Press . • REVIEW • AMS.
Press . • REVIEW • AMS repeatedly until you
reach the beginning of the desired track.
2)
Press > • CUE • AMS.
Press and hold . • REVIEW • AMS or > • CUE •
AMS.
During pause, press and hold . • REVIEW • AMS or
> • CUE • AMS.
While the recorder is stopped, press and hold . •
REVIEW • AMS or > • CUE • AMS.
Press x • STOP and open the lid.
3)
17
Need help?
Do you have a question about the MZ-B10 Operating Instructions (primary manual) and is the answer not in the manual?
Questions and answers