Advertisement

Quick Links

SERVICE MANUAL
Ver 1.2 2003. 09
US and foreign patents licensed from Dolby
Laboratories.
Audio playing system
MiniDisc digital audio system
Laser diode properties
Material: GaAlAs
Wavelength: λ = 790 nm
Emission duration: continuous
Laser output: less than 44.6 µW
(This output is the value measured at a distance
of 200 mm from the lens surface on the optical
pick-up block with 7 mm aperture.)
Recording and playback time
When using MDW-80
Maximum 160 min. in monaural.
Maximum 320 min. in LP4 stereo
Revolutions
350 rpm to 2,800 rpm (CLV)
Error correction
ACIRC (Advanced Cross Interleave Reed
Solomon Code)
Sampling frequency
44.1 kHz
Sampling rate converter
Input: 32 kHz/44.1 kHz/48 kHz
Coding
ATRAC (Adaptive TRansform Acoustic
Coding)
ATRAC3 — LP2/LP4
Sony Corporation
9-877-031-03
2003I16-1
Personal Audio Company
C 2003.9
Published by Sony Engineering Corporation
Model Name Using Similar Mechanism
Mechanism Type
Optical Pick-up Name
SPECIFICATIONS
Modulation system
EFM (Eight to Fourteen Modulation)
Speakers (two units)
28 mm (1
1
/
in.) dia. per unit
8
Frequency response (digital/analog
input)
20 to 20,000 Hz ± 3 dB
Inputs
Microphone: stereo mini-jack
(minimum input level 0.25 mV)
1)
Line in
:
stereo mini-jack for analog input
(minimum input level 39 mV)
optical (digital) mini-jack for optical
(digital) input
Outputs
i: stereo mini-jack (dedicated remote control
jack)
2)
Maximum output (DC)
Headphones/earphones: 5 mW + 5 mW (16
)
Speakers (monaural): 140 mW (70 mW × 2)
General
Power requirements
AC power adaptor DC 3V
LR6 (size AA) alkaline dry battery
PORTABLE MINIDISC RECORDER
MZ-B10
US Model
AEP Model
Tourist Model
NEW
MT-MZN710-177
LCX-5R
2)
Dimensions
Approx. 117.2 × 23.0 × 74.4 mm (w/h/d)
×
× 3 in.) not incl. projecting parts
(4
5
/
29
/
8
32
and controls.
Mass
Approx. 150 g (5.3 oz) (main unit only)
1)
The LINE IN (OPTICAL) jack is used to
connect either a digital (optical) cable or a line
(analog) cable.
2)
Measured in accordance with JEITA.
Supplied accessories
Headphones/earphones (1)
Headphones/earphones (1)
Carrying pouch (1)
Handstrap (1)
Clamp filter for the AC power adaptor (1)
Attach the clamp filter when using the optional
AC power adaptor.
LR6 (size AA) alkaline dry
batteries (2) (World model only)
Design and specifications are subject to change
without notice.
– Continued on next page –

Advertisement

Table of Contents
loading

Summary of Contents for Sony MZ-B10

  • Page 1 AC power adaptor DC 3V Coding) LR6 (size AA) alkaline dry battery ATRAC3 — LP2/LP4 – Continued on next page – PORTABLE MINIDISC RECORDER Sony Corporation 9-877-031-03 2003I16-1 Personal Audio Company C 2003.9 Published by Sony Engineering Corporation...
  • Page 2: Battery Life

    AC power adaptor since it may cause the recorder to malfunction. MONO Polarity of the When using a Sony LR6 (SG) “STAMINA” plug alkaline dry batteries (produced in Japan) and “PowerMode” is set to “NORMAL” (page 40). Setting “PowerMode” to “QUICK”...
  • Page 3: Table Of Contents

    MZ-B10 TABLE OF CONTENTS 1. SERVICING NOTES ............4 2. GENERAL ................5 3. DISASSEMBLY 3-1. Disassembly Flow ............6 3-2. Case (Lower) Assy ............7 3-3. Speaker Assy ..............7 3-4. MAIN Board ..............8 3-5. Electret Condenser Microphone (MIC901) ....8 3-6.
  • Page 4: Servicing Notes

    MZ-B10 SECTION 1 SERVICING NOTES • In performing the repair with the power supplied to the set, re- NOTES ON HANDLING THE OPTICAL PICK-UP moving the MAIN board causes the set to be disabled. BLOCK OR BASE UNIT In such a case, make a solder bridge to short SL802 (OPEN The laser diode in the optical pick-up block may suffer electro- CLOSE) on the MAIN board in advance.
  • Page 5: General

    MZ-B10 SECTION 2 This section is extracted GENERAL from instruction manual. Looking at the controls P MIC (PLUG IN POWER) jack R VOL control Front of the recorder Connect an optional stereo The VOL control has a tactile dot. microphone to this jack to record.
  • Page 6: Disassembly

    MZ-B10 SECTION 3 DISASSEMBLY • This set can be disassembled in the order shown below. 3-1. Disassembly Flow CASE (LOWER) ASSY MECHANISM DECK CASE (UPPER) ASSY SPEAKER ASSY MAIN BOARD (MT-MZN710-177) ELECTRET CONDESER MICROPHONE (MIC901) LCD MODULE SET CHASSIS ASSY,...
  • Page 7: Case (Lower) Assy

    MZ-B10 Note: Follow the disassembly procedure in the numerical order given. 3-2. Case (Lower) Assy 1 three screws (M1.4) Note: On installation, adjust the position of both switch and knob (hold). knob (hold) 5 Remove the case (lower) in the direction of the arrow.
  • Page 8: Main Board

    MZ-B10 3-4. MAIN Board 1 Remove the four solderings 7 two screws (M 1.4) white blue 2 Remove the black two solderings 9 MAIN board 5 flexible board (CN801) 3 Remove two solders of the flexible board (over write head).
  • Page 9: Set Chassis Assy, Case (Spk) Assy

    MZ-B10 3-6. Set Chassis Assy, Case (Spk) Assy 8 set chassis assy 6 compression spring (ground) 3 screw (M 1.4) 1 screw (M 1.4) 7 spring (limiter) 5 case (spk) assy 2 two screws (M 1.4) 4 spring (pop-L) 3-7.
  • Page 10: Lcd Module

    MZ-B10 3-8. LCD Module 5 LCD module 2 two screws 6 screw 1 five screws 4 two claws 7 REC button assy 3 claw 8 two screws 9 knob (open) 3-9. Rec Button Assy 2 claw 7 tension spring (release)
  • Page 11: Mechanism Deck (Mt-Mzn710-177)

    MZ-B10 3-10. Mechanism Deck (MT-MZN710-177) 3 two step screws (MD) 2 flexible board (motor) 5 mechanism deck (CN701) (MT-MZN710-177) 1 Remove the two solderings 4 flexible board (optical pick-up) (CN501)
  • Page 12: Gear (Sa), Op Service Assy (Lcx-5R)

    MZ-B10 3-11. Gear (SA), OP Service Assy (LCX-5R) 2 gear (SA) 5 screw (M1.4) 1 washer (0.8-2.5) 6 thrust detent spring 3 screw (M1.4) 8 Pull off lead screw. 4 rack spring 9 Opening the over write head toward the direction A , remove the OP service assy (LCX-5R) toward the direction B .
  • Page 13: Holder Assy

    MZ-B10 3-12. Holder Assy 4 holder assy 2 Open the holder assy. 3 boss 1 convex portion 3 boss 3-13. DC Motor (Sled) (M602) 2 washer (0.8-2.5) 3 gear (SA) 4 two screws (M1.4) 1 Remove six solders 5 DC motor (sled) (M602)
  • Page 14: Dc Motor (Over Write Head Up/Down) (M603)

    MZ-B10 3-14. DC Motor (Over Write Head Up/Down) (M603), DC SSM18B Motor (Spindle) (M601) 1 Remove six solders of the motor flexible board. 2 tapping screw 3 motor cover 7 DC motor (over write head up/down) (M603) Note: Press-fit the gear (HA) up to the position of the DC motor (over write head up/down) (M603) as shown below.
  • Page 15: Test Mode

    MZ-B10 SECTION 4 TEST MODE Outline Operation in Setting the Test Mode • This set provides the Overall adjustment mode that allows CD • When the test mode becomes active, first the display check mode and MO discs to be automatically adjusted when in the test mode.
  • Page 16 MZ-B10 Configuration of Test Mode [SPEED CONTROL +] key:100th place [Major item switching] of item number increase. [Test Mode $Display Check Mode%] [SPEED CONTROL --] key: 100th place Press the key, > of item number decrease. > [VOL +] or press the...
  • Page 17 MZ-B10 [DIS- 5. The display changes a shown below each time the Overall Adjustment Mode PLAY] key on the remote commander is pressed. Mode to adjust the servo automatically in all items. Normally, automatic adjustment is executed in this mode at the repair.
  • Page 18 MZ-B10 [GROUP] [DISPLAY] If the key or the key on the remote com- mander is pressed with this display, the LCD switches to the simple display mode. 4. Quit the self-diagnosis result display mode, and press the to return to the test mode (display check mode).
  • Page 19 MZ-B10 Sound Skip Check Result Display Mode • Cause of Sound Skip Error This set can display the count of errors that occurred during the Cause of error Description of error recording/playing for checking. Sound error correction error • Setting Method of Sound Skip Check Result Display...
  • Page 20: Electrical Adjustments

    After adjusting, release the test mode. 2. Use the following tools and measuring instruments. • Test CD disc TDYS-1 (Part No. : 4-963-646-01) • SONY MO disc available on the market • Digital voltmeter NV reset (after several seconds) • Laser power meter LPM-8001 (Part No.
  • Page 21 MZ-B10 Rewriting the NV values Power Supply Manual Adjustment Note : Modify four adjusted values through the following proce- • Adjustment sequence dure. Modifying the item number 863 and 864 is not neces- Adjustment must be done with the following steps.
  • Page 22 MZ-B10 • Adjustment Method of VC1_HIGH (REC) • Adjustment Method of VC2_HIGH (item number: 742) (item number: 744) Set LCD display Set LCD display VC1 H VC2 Hi ** ** : Adjusted value ** : Adjusted value 1. Connect a digital voltmeter to the TP1928 (VCO1) on the 1.
  • Page 23 MZ-B10 • Adjustment Method of REG3_LOW1 • Adjustment Method of REG3_HIGH (item number: 747) (item number: 749) Set LCD display Set LCD display REG3L1 ** REG3 H ** ** : Adjusted value ** : Adjusted value 1. Connect a digital voltmeter to the TP1907 (REGO3) on the 1.
  • Page 24 MZ-B10 • Adjustment Method of VREC_MIDDLE (X4 speed) (item number: 752) Set LCD display VREC M ** ** : Adjusted value 1. Connect a digital voltmeter to the TP1620 (VREC) on the [SPEED CONTROL+] MAIN board, and adjust key (voltage...
  • Page 25 MZ-B10 Adjustment/checking and Connection Location: MAIN BOARD (SIDE B) TP1620 (VREC) TP1909 (REGO1) TP1928 (VCO1) TP1907 (REGO3) (GND) (VREC) IC601 (REGO1) (VCO1) (REGO3) (VCOUT) TP1616 (GND) TP1905 (VCOUT) IC901 R925 TP1322 TP1323 IC701 IC501 IC802 IC301 IC801 S804...
  • Page 26 MZ-B10 Power Supply Adjustment Auto Item Feed 5. Connect a digital voltmeter to the measuring points on the [SPEED CON- MAIN board, and adjust the voltage with the TROL +] [SPEED CONTROL --] Note: This mode is available to perform the temperature correction and key.
  • Page 27 MZ-B10 Ver 1.1 2003.06 Laser Power Check 9. Check that the laser power meter reading is 4.95 ± 0.59 mW. 10. Press the key, and set the laser MO (X4 speed) write > Note: If result of measurement of the laser power does not satisfy check mode (item number 014).
  • Page 28 MZ-B10 • Overall Adjustment Mode (Title Display) 6. Insert MO disc in the set, and press the > key to set the MO overall adjustment mode. Automatic adjustments are Set LCD display made. Assy** Set LCD display MO RUN : (Disc mark) At end of power supply adjustment: Outside lit...
  • Page 29 MZ-B10 • CD and MO Overall Adjustment Items 1. CD overall adjustment items Item No. Description Item No. Description READ GRV adjustment 1 VC,VR power supply H/L selection R_GRV setting . servo OFF HPIT setting . servo OFF SLED outward movement...
  • Page 30 MZ-B10 Remuse Clear 3. Press the > key to set the item number 023. Set LCD display Perform the Resume clear when all adjustments completed. NoPach • Resume Clear Setting Method 1. Select the manual mode of the test mode, and set item number (When not patched) 043 (see page 16).
  • Page 31 MZ-B10 [SPEED CONTROL +] 12. Press the X key or press the key on the remote com- 8. Press the key to set the address value mander to write all patch data to the nonvolatile memory. to the next address for adjustment.
  • Page 32 MZ-B10 • Patch data list (V.1.300) Address value Adjusted value Address value Adjusted value Address value Adjusted value 2A4D 2A86 2A14 2A4E 2A87 2A15 2A16 2A4F 2A88 2A50 2A89 2A17 2A51 2A8A 2A18 2A19 2A52 2A8B 2A1A 2A53 2A8C 2A54...
  • Page 33 MZ-B10 Address value Adjusted value Address value Adjusted value Address value Adjusted value 2ABF 2AF9 2B33 2AC0 2AFA 2B34 2AC1 2AFB 2B35 2AC2 2AFC 2B36 2AC3 2AFD 2B37 2AC4 2AFE 2B38 2AC5 2AFF 2B39 2AC6 2B00 2B3A 2AC7 2B01 2B3B...
  • Page 34 MZ-B10 Address value Adjusted value 2B6D 2B6E 2B6F 2B70 2B71 2B72 2B73 2B74 2B75 2B76 2B77 2B78 2B79 2B7A 2B7B 2B7C 2B7D 2B7E 2B7F 2B80 2B81 2B82 2B83 2B84 2B85 2B86 2B87 2B88 2B89 2B8A 2B8B 2B8C 2B8D 2B8E 2B8F...
  • Page 35: Diagrams

    MZ-B10 SECTION 6 DIAGRAMS 6-1. Block Diagram SYSTEM CONTROL, DVDD RF AMP HP AMP REGO1 IC501 IC801(1/2) IC302 SDI0 SIO0 SYSTEM CONTROL, RV301 SDO0 OPTICAL PICK-UP DVCC REGO1 AOUT L SDO0 IC801(2/2) SCK0 BLOCK AVCC REGO1 SCK0 L IN AVCC2...
  • Page 36: Note For Printed Wiring Board And Schematic Diagrams

    MZ-B10 6-2. Note For Printed Wiring Board And Schematic Diagrams • Waveforms Note on Printed Wiring Board: Note on Schematic Diagram: • X : parts extracted from the component side. • All capacitors are in µF unless otherwise noted. pF: µµF...
  • Page 37: Printed Wiring Board - Main Board (Side A)

    MZ-B10 6-3. Printed Wiring Board – MAIN Board (Side A) – :Uses unleaded solder. MAIN BOARD (SIDE A) S 8 0 7 S 8 0 6 E R A S E A L L E R A S E H P - D E T...
  • Page 38: Printed Wiring Board - Main Board (Side B)

    MZ-B10 6-4. Printed Wiring Board – MAIN Board (Side B) – :Uses unleaded solder. MAIN BOARD (SIDE B) SWITCH & LCD MODULE OVER WRITE HEAD (GND) (VREC) J303 IC601 (REGO1) REMOTE (VCO1) (REGO3) HP-DET RGND (VCOUT) KEY-R J601 DTCK DC IN 3V...
  • Page 39: Schematic Diagram – Main Board (1/4)

    MZ-B10 6-5. Schematic Diagram – MAIN Board (1/4) – • See page 36 for Waveforms. • See page 43,44 and 45 for IC Block Diagrams. C513 0.022 C524 TP1539 R511 CN501 TP1504 TP1507 C535 C526 TP1506 0.047 TP1505 TP1522 C506 TP1523 0.01...
  • Page 40: Schematic Diagram - Main Board (1/4)

    MZ-B10 Ver 1.2 2003.09 6-6. Schematic Diagram – MAIN Board (2/4) – • See page 36 for Waveforms. C823 R830 TP1825 TP1824 TP1823 TP1822 TP1821 C827 0.047 TP1820 R848 R847 2.2k TP1819 TP1818 TP1817 C834 S805 TP1816 R859 C838 0.01...
  • Page 41: Schematic Diagram - Main Board (3/4)

    MZ-B10 6-7. Schematic Diagram – MAIN Board (3/4) – • See page 36 for Waveforms. • See page 43 for IC Block Diagrams. R341 4.7k R840 IC802 AK6480AM-E2 C301 C830 TP1844 Q304 TP315 R306 TP1322 XP4401-TXE INT_MIC 2.2k MIC(+) TP1845...
  • Page 42: Schematic Diagram - Main Board (4/4)

    MZ-B10 6-8. Schematic Diagram – MAIN Board (4/4) – • See page 36 for Waveforms. • See page 46 for IC Block Diagrams. R843 R846 TP1848 TP1849 2.2k 2.2k TP927 (VCO1) R944 R844 R845 TP1928 (VCO1) R943 S806 S807 CN801...
  • Page 43: Ic Block Diagrams

    MZ-B10 • IC Block Diagrams IC302 TA2131FL(EL) BEEP VREF V REF LPF1 TC MT VCC1 BST NF1 BST1 LPF2 BEEP BST2 BST NF2 OUTB BST OUT BEEP OUTA IC501 SN761058ZQLR AVCC PEAK/ OFTRK T-ON BOTM 42 FE ABCD 41 ABCD...
  • Page 44 MZ-B10 IC601 XPC18A22AEPR2 VC2 VG OUTPUT SW OUTPUT SW CHARGE CHARGE PUMP 1 PUMP 2 VC VG DC IN HI-BRIDGE CHARGE PRE DRIVER PRE DRIVER MONITOR VREF VREF X2/X4 BATM BUFFER DC IN CVREF CONTROL CONTROL CHARGE CHGSW DW BT...
  • Page 45 MZ-B10 IC701 SC111258EPR2 48 47 46 45 52 51 3Phase BIAS control 3Phase control PGNDW2 VG VC PGNDW1 VMVW2 3Phase Pre driver WMVW1 3Phase Pre driver PGNDUV2 PGNDUV1 35 UO2 VMU2 VMR2 VMU1 VG VC VMR1 H-BRIDGE PGND2 DRIVER H-BRIDGE...
  • Page 46 MZ-B10 IC901 SC901580EPR2 (HP AMP) AMP1 CONTROL BANDGAP FFCLR1 48 VREF REFERENCE XWAKE4 47 REGC3 REF1 XWAKE3 46 REGC2 REF2 REF3 XWAKE2 45 REGC1 REF4 REF5 XWAKE1 44 REGI1 SERIES PASS REGULATOR1 REF3 VRMC 43 REGO1 FFCLR 42 VC2 SERIES PASS...
  • Page 47: Ic Pin Function Description

    MZ-B10 Ver 1.2 2003.09 6-9. IC Pin Function Description • IC801 CXD2680-207GA (SYSTEM CONTROLLER, DIGITAL SIGNAL PROCESSOR) Pin No. Pin Name Description OSCI Resonator connection terminal for the system clock (22.5792MHz) OSCO Resonator connection terminal for the system clock (22.5792MHz)
  • Page 48 MZ-B10 Pin No. Pin Name Description ADDT Data input from the external A/D converter LRCK L/R sampling clock (44.1KHz) output to the external A/D converter XBCK Bit clock (2.8224MHz) output to the external A/D converter FS256 11.2896MHz clock output Filter cutoff control signal output Not used (open)
  • Page 49 MZ-B10 Pin No. Pin Name Description BATT_CTL_1 Control signal output for the voltage step up circuit in the external battery case Not used (open) BATT_CTL_2 Not used (open) Not used (open) 114, 115 PD_S0, 1 PD IC mode changeover signal output to the optical pick up...
  • Page 50 MZ-B10 Pin No. Pin Name Description WK_DET Set key WAKE detection signal input Not used (fixed at “H”) HALF_LOCK_SW Open button detection switch input (A/D input) “L” : the open button is pressed RMC_KEY Key input (A/D input) from the remote commander...
  • Page 51 MZ-B10 Pin No. Pin Name Description — DRAM chip select terminal Not used (open) — DRAM clock terminal Not used (open) — DRAM clock enable terminal Not used (open) UDQM — DRAM byte mask terminal Not used (open) LDQM —...
  • Page 52 MZ-B10 Pin No. Pin Name Description FVDD0 — Power supply terminal (for the built-in flash memory) FVSS0 — Ground terminal (for the built-in flash memory) 301, 302 DVDD5, 6 — Power supply terminal 303, 304 DRAMVDD3, 4 — Power supply terminal (for DRAM) 305 to 312 —...
  • Page 53: Exploded Views

    MZ-B10 SECTION 7 EXPLODED VIEWS NOTE: • -XX and -X mean standardized parts, so they • Items marked “*” are not stocked since they The components identified by mark 0 or dotted line with mark 0 are may have some difference from the original are seldom required for routine service.
  • Page 54: Upper Chassis Section

    MZ-B10 7-2. Upper Chassis Section Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark X-3383-479-1 CASE (UPPER) ASSY 3-247-869-01 LEVER (REC-LOCK) 3-237-946-01 LOCKER, OPEN X-3382-767-1 LEVER (RELEASE) ASSY 3-375-114-71 SCREW 3-247-868-01 LEVER (REC) 3-252-845-01 SHEET (LCD), ADHESIVE...
  • Page 55: Chassis Section

    MZ-B10 7-3. Chassis Section MD mechanism deck (MT-MZN710-177) MIC901 supplied SP901 supplied SP902 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-237-072-02 SCREW(MD)STEP X-3382-766-1 CHASSIS ASSY, SET 3-247-857-01 SPRING (POP UP), TORSION * 113 A-3347-526-A MAIN BOARD, COMPLETE...
  • Page 56: Mechanism Deck Section-1 (Mt-Mzn710-177//M)

    MZ-B10 7-4. Mechanism Deck Section-1 (MT-MZN710-177//M) mechanism deck section-2 (MT-MZN710-177//M) not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark X-3381-219-3 HOLDER ASSY 3-043-237-02 BEARING (N) 3-224-779-02 SPRING, THRUST DETENT 4-222-203-02 SCREW, LEAD 0 309 3-225-996-01 SCREW (M1.4)(EG),PRECISION PAN...
  • Page 57: Mechanism Deck Section-2 (Mt-Mzn710-177//M)

    MZ-B10 7-5. Mechanism Deck Section-2 (MT-MZN710-177//M) M602 M603 not supplied M601 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-225-278-12 SCREW, TAPPING 3-235-839-02 LEVER (RACK) 3-235-838-02 COVER, MOTOR 3-338-645-31 WASHER (0.8-2.5) 3-235-836-01 GEAR (HB) 4-222-222-01 GEAR (RACK)
  • Page 58: Electrical Parts List

    MZ-B10 SECTION 8 ELECTRICAL PARTS LIST MAIN NOTE: The components identified by • Due to standardization, replacements in the • Items marked “*” are not stocked since they mark 0 or dotted line with mark 0 are critical for safety.
  • Page 59 MZ-B10 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C602 1-164-943-11 CERAMIC CHIP 0.01uF 10.00% 16V C820 1-125-777-11 CERAMIC CHIP 0.1uF 10.00% 10V C603 1-125-777-11 CERAMIC CHIP 0.1uF 10.00% 10V C821 1-164-943-11 CERAMIC CHIP 0.01uF 10.00% 16V...
  • Page 60 MZ-B10 Ver 1.2 2003.09 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark D603 6-500-483-01 DIODE MA22D2800LS0 L601 1-428-912-21 INDUCTOR 10uH D605 6-500-483-01 DIODE MA22D2800LS0 L603 1-414-398-11 INDUCTOR 10uH D606 8-719-081-35 DIODE MA2YD1700LS0 L801 1-414-398-11 INDUCTOR...
  • Page 61 MZ-B10 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R205 1-208-715-11 METAL CHIP 0.5% 1/16W R606 1-216-797-11 METAL CHIP 1/10W R206 1-208-927-11 METAL CHIP 0.5% 1/16W R608 1-218-965-11 RES-CHIP 1/16W R207 1-208-715-11 METAL CHIP 0.5%...
  • Page 62 MZ-B10 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R862 1-218-990-11 SHORT CHIP MISCELLANEOUS R863 1-218-945-11 RES-CHIP 1/16W ************** R864 1-218-985-11 RES-CHIP 470K 1/16W R865 1-218-981-11 RES-CHIP 220K 1/16W 1-804-976-11 LCD MODULE R866 1-218-981-11 RES-CHIP...
  • Page 63 MZ-B10 MEMO...
  • Page 64: Revision History

    MZ-B10 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2003.03...

Table of Contents