G Transportation In Motor Vehicles 1/3 - R82 combi frame User Manual

TRANSPORTATION
GB
IN MOTOR
VEHICLES 1/3
Combi Frame is dynamically tested according to
ISO 7176-19.
The following instructions must be followed to
maintain the safety.
The approval is not valid on special made
chairs.
Combi Frame is approved for transporting
the user in motor vehicles. Please look at
MEASURES in the back of this manual for
the max load. indication.
The user should transfer to the vehicle
seat and use the vehicle-installed restraint
system whenever possible.
The Combi Frame must be placed in a
forward-facing position, when used as a
seat in a motor vehicle. Use an approved
4-point strap-type tiedown system acoor-
ding to ISO 10542-2.
Use an approved 3-point belt according to
ISO 10542-1 in the wheelchair. Restraints
should not be held away from the body by
wheelchair components such as armrests
or wheels. It is not enough ONLY to use a
hipbelt.
All accessories must be removed from
the wheelchair and secured separately in
the vehicle. Accessories which can not be
removed, must be secured to the wheel-
chair but positioned away from the user
with energy-absorbing padding placed
between the accessories and the user.
The Combi Frame should be inspected by
the dealer before reuse followng involv-
ment in any type of vehicle collision.
The following instructions on how to pre-
pare the seat and chair, must be carried
through before transportation.
Restraints should
away from body
by wheelchair
components such
as armrests or
25
not be held
wheels
G
B