Table of Contents
Advertisement
Quick Start Guide
Connecting BiPAC 7300VGP series
1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone (LINE) network.
2. Power on the device.
3. Make sure the PWR and SYS LEDs are lit steadily and that the relevant LAN LED is lit.
4. Connect an RJ11 cable to VoIP port when connecting to an analog phone set.
5. Connect an RJ11 cable to LINE port when connecting to the telephone wall jack
4
Advertisement
Table of Contents
Need help?
Do you have a question about the VoIP/(802.11g) ADSL2+ Router BiPAC 7300VGP and is the answer not in the manual?