Intermodule Synchronization Interface; Characteristics Of Standard Interfaces - L-Card L-502-P-G-D-I User Manual

55

5.5.2. Intermodule synchronization interface

Topology of multimodule connections over synchronization lines
Maximum number of synchronized L-502 modules in a serial
synchronization scheme
Maximum cable length of the intermodule synchronization
Number of intermodule synchronization lines

5.6. Characteristics of standard interfaces.

Parameter, characteristics
Standard for an interface with a computer
The bit depth of the L-502 data word on the PCIe
DMA support in the BUS MASTER mode on the PCle
Interface with a computer
Main interface of input-output for ADC, DAC, digital I/O
Main control interface
SDRAM interface
Debugging interface
Compatibility with JTAG emulators Analog Devices
Parameter
Interface with a computer
Interfaces of the signal processor ADSP-BF523 (L-502-P)
Value
Sequence
Equal to the number of PCI-E slots in
the PC motherboard
40 mm (only for an adjacent module
PCI-E)
4 twisted pairs (2 inputs from the master
and 2 outputs to the slave)
Value, description
PCIe x1
32 bits
Yes
HOST DMA 16 bits
SPORT0, >120 Mbit/s, duplex
SPI
32 MB; 16 bit; 132.5 MHz
JTAG
ADZS-ICE-100B,
ADZS-USB-ICE,
ADZS-HPUSB-ICE.