Jtag Connector - L-Card L-502-P-G-D-I User Manual

41
The L-502-SYNC cable is clad with a black ferrite ring that improves electromagnetic
compatibility. The length of the cable L-502-SYNC is designed for connection L-502, located only in
adjacent PCI-Express slots.
If you intend to use the L-502-SYNC cable together with the old versions of 1 or 2 L-502
modules, then the cable connector housing should be shortened (this modification will be made by the
L-Card at your request).

4.2.5. JTAG connector.

To debug your own Blackfin software on the L-502 board, you should use one of the JTAG-
emulators from Analog Devices: ADZS-USB-ICE, ADZS-HPUSB-ICE or ADZS-ICE-100B with
the USB-interface. They differ significantly with USB transfer rate and price. You can get
information on these devices on the manufacturer's website
The board has a JTAG connector,
The operation of attaching and detaching the JTAG-emulator connector should be
done in the de-energized state of both devices.
!
If the JTAG emulator and L-502 are to be used in different computers, then the
computer grounding circuits (enclosures) must be pre-connected!
Do not connect the JTAG connector to other devices which are not specified in this
chapter.
Fig. 4-8: Intermodule synchronization cable L-502-SYNC
fig.
4.2: L-502 connectors description.
www.analog.com
4-9, compatible with the above JTAG- emulators.
Fig. 4-9. JTAG
.