Panasonic KX-TDE200GR Service Manual page 42

KX-TDE200GR
8.1.1.15. Utility-CS Information
Displays information stored by the PBX regarding each Cell Station (CS).
This option is only available at Installer level, and requires that the target CSIF, DHLC or DLC card be set to INS status.
The displayed items are as follows:
Item
Slot
Port
CS Name
Status
Version
Revision
CSID
Path
Group Call
To view CS information
1. From the Utility menu, select CS Information.
2. From the Target CSI/F Slot No drop-down list, select the target slot.
• To display information on a single card, select the slot number and name of that card.
• To display information on all matching cards, select "All".
3. From the Interval Timer drop-down list, select the number of seconds between each automatic screen refresh.
4. Click Start to begin monitoring.
Monitoring will be performed and the screen will refresh according to the interval specified.
To refresh the screen manually at any time, click Refresh.
5. Click Stop to end monitoring.
6. Select an option:
• Click Capture if you want to save the displayed information.
1. Enter a file name, or select a file to overwrite.
2. Click Save.
• Click Cancel to return to the main screen.
8.1.1.16. Utility-PS Information
Displays Portable Station (PS) registration information, including the associated Cell Station (CS).
This option is only available at Installer level.
The displayed items are as follows:
Item
PS No.
Extension Number
Location-Slot
LocationóPort
To view PS information
1. From the Utility menu, select PS Information.
2. Click Refresh.
Number of the slot.
Number of the port
Name of the attached CS
Service status of the attached CS: INS, OUS, or FAULT.
If the status is FAULT, subsequent data items for that port will be left blank.
Version number of the program file stored in the CS
Revision number of the program file stored in the CS
12-digit ID number of the CS
Number of the wireless extension currently using each path. In the case of a group, several
extensions may be using the same floating extension number.
When an extension number is not registered, the display shows "OFF". PSs can use up to 3
paths.
Number of PSs registered to the attached CS that are members of a PS Ring Group.
PS location number.
Only registered PSs will be displayed.
Extension number of the PS.
Slot number of the CS that the PS is registered with.
Port number of the CS that the PS is registered with.
42
Description
Description