Scanner Motor - Ricoh Aficio MP 1600L2 Field Service Manual

1. Specify SP mode settings:
Select SP 4305 1, and specify 2 (=Yes). The machine will detect 8K/16K rather than A3/A4/B4/
B5 (A3-SEF/B4-SEF
2. Turn off the main switch.
3. Exposure glass ( p.85 "Exposure Glass/DF Exposure Glass ").
4. Original width/length sensors [A] [B]
5. Rearrange the sensor positions [C] [D].
6. Turn on the main switch and check the operations.

Scanner Motor

1. Left upper cover, front upper left cover, operation panel, top rear cover (
DF Exposure Glass ")
2. Exposure glass ( p.85 "Exposure Glass/DF Exposure Glass ")
3. Rear exhaust fan [A] (B244/B269/B277 only)
4. Scanner motor [B] ( x 3,
• Install the belt first, and then set the spring when you reassemble. Fasten the leftmost screw (viewed
from the rear), and fasten the other two screws.
• Adjust the image quality after you install the motor.
8K-SEF; B5-SEF/A4-SEF
x 1, 1 spring, 1 belt)
16K-SEF; B5-LEF/A4-LEF
p.85 "Exposure Glass/
Scanner Unit
16K-LEF).
4
89