4. Replacement and Adjustment
Tray
Any paper tray
By-pass feed
Duplex
1st tray
2nd tray
3rd tray
(Optional PFU tray 1)
4
By-pass feed
Duplex
A: Leading Edge Registration
B: Side-to-side Registration
Blank Margin
• If the leading edge or side-to-side registration cannot be adjusted to within the specification, then
adjust the leading-edge blank margin or the left-side blank margin.
1. Check the trailing edge and right side edge blank margins, and adjust them using the following SP
modes.
142
SP mode
SP 1001 1
SP 1001 2
SP 1001 3
SP 1002 1
SP 1002 2
SP 1002 3
SP 1002 4
SP 1002 5
Specification
2 ± 1.5 mm