Processor Board Removal - HP 200 Series Hardware Support Document

Removal and Replacement
35
Processor Board Removal
To remove the processor board, proceed as follows:
1. Remove the top cover and rear panel.
2. Position the computer so that the back is facing you.
3. Place your thumbs on the interface connectors and lever the board out toward you.
When replacing a defective processor board with a new one, BE SURE to remove the 10 PROM
from the defective board and install it on the replacement board. Failure to do so will prevent the
computer from running secured software.
[yIDPROM
ID PROM Location