HP 200 Series Hardware Support Document page 36

28
Removal and Replacement
WARNING
REMOVE ALL AC POWER TO THE COMPUTER BEFORE REMOV-
ING ANY ASSEMBLY.
CAUTION
INTEGRATED CIRCUITS CAN BE DAMAGED BY ELECTROSTA-
TIC DISCHARGE. USE THE FOLLOWING PRECAUTIONS:
DO NOT WEAR CLOTHING SUBJECT TO STATIC CHARGE BUIL-
DUP. SUCH AS WOOL OR SYNTHETIC MATERIALS.
DO NOT HANDLE INTEGRATED CIRCUITS IN CARPETED AREAS.
DO NOT REMOVE AN INTEGRATED CIRCUIT FROM ITS CON-
DUCTIVE FOAM PAD UNTIL YOU ARE READY TO INSTALL IT.
AVOID TOUCHING CIRCUIT LEADS. HANDLE BY THE PLASTIC
PACKAGE ONLY.
HANDLE BOARDS BY THE EDGES OR EJECTORS.
BOARDS SHOULD BE SHIPPED IN BLACK POLY BAGS. DO NOT
REMOVE A BOARD FROM ITS BAG UNTIL YOU ARE READY TO
INSTALL IT.
KEEP INTEGRATED CIRCUITS AND BOARDS AWAY FROM
SOURCES OF STATIC, SUCH AS: CLOTHING, PAPER, TAPE,
STYROFOAM, PLASTIC, WAX OR MOVING AIR.
KEEP INTEGRATED CIRCUITS AND BOARDS IN THEIR PROTEC-
TIVE PACKAGING WHEN NOT AT A STATIC-SAFE WORKSTA-
TION.
HANDLE INTEGRATED CIRCUITS AND BOARDS ONLY AT A STA-
TIC-SAFE WORKSTATION, AND ONLY WHEN YOU ARE PROPER-
L Y GROUNDED.
AVOID TOUCHING CIRCUIT LEADS. TRACES, EDGE CONNEC-
TORS OR METALIZED Ie CAPS.