Table of Contents
Advertisement
122 . Spotlight 200 User's Guide
Connecting the Microscope to the Spectrometer
The cable from the microscope to the spectrometer comes from the preamp inside the
microscope, to a connector marked
The connections from the pre-amp in the microscope to the spectrometer are described
below:
Pl 1 (PCB)
D-type Connector
1.
11
2.
10
3.
9
4.
12
5.
13
6.
14
Figure 48 Electrical Connections for a Microscope Connected to a Spectrometer,
PC and Stage Controller
on the rear of the spectrometer.
Line
Output Signal
Output Signal (0 V)
0 V
0 V
+12 V
−12 V
Power Requirement
250 mA
200 mA
Advertisement
Table of Contents
