Table of Contents
Advertisement
Maintenance
Switch off the mains voltage and remove the mains cord before
cleaning.
WARNING
A Responsible Body must perform routine maintenance on your microscope to make sure
that it is safe and performing well. This involves:
•
Inspecting the microscope;
Protecting the microscope;
•
Cleaning the optics;
•
Cleaning the microscope cover;
•
•
Renewing the fuse;
•
Testing the stage controller;
•
Renewing the stage controller fuse;
Service.
•
This chapter contains a list of the available spare parts and optional equipment for the
microscope.
If you need to replace a part, use only PerkinElmer approved spare parts.
The covers of the microscope must only be removed by a PerkinElmer
Service Engineer.
CAUTION
Inspecting the Microscope
At least once a year, or whenever the microscope has been subjected to adverse
environmental conditions, visually inspect the housing to make sure that no covers are loose
or distorted.
At the same time, make sure that all required labels are firmly in place; see
on page 19.
Maintenance . 113
Warning Labels
Advertisement
Table of Contents
