Table of Contents
Advertisement
114 . Spotlight 200 User's Guide
Protecting the Microscope
The most important rule in caring for the microscope is to keep it as free from dust and dirt
as possible. Dust, fingerprints, and smears on the optics reduce the quality of the images it
produces.
Whenever the microscope is not in use, cover it with a plastic cover.
Ensure the power is switched off when the microscope is covered.
CAUTION
Cleaning
The microscope was aligned, cleaned, and sealed at the factory. Do not attempt to take it
apart.
Avoid the excessive use of solvents. Flowing solvents dissolve the
cement on cemented optics; dissolved cement can damage mirror
CAUTION
surfaces.
Cleaning the Cover
Ensure the power is switched off and the supply lead is disconnected
before cleaning the cover.
CAUTION
You can clean the outside of the microscope or stage controller using a damp cloth. Mild
detergent may be used, if necessary. Always perform a patch test on an inconspicuous area,
before you clean the entire instrument.
Avoid spilling liquid into the microscope or stage controller. Clean all external spills
immediately. If anything that is spilled enters the main body of any part of the system,
switch off the power and call a PerkinElmer Service Engineer.
Advertisement
Table of Contents
