Step 4: Connecting The Audio Cords - Sony DVP-F35P Operating Instructions Manual

Step 4: Connecting the Audio Cords

Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
Components to be connected
TV
• Surround effects:
– TVS DYNAMIC (page 47)
– TVS WIDE (page 47)
Stereo amplifier (receiver) and two speakers
• Surround effects:
– TVS STANDARD (page 47)
or
MD deck/DAT deck
• Surround effects:
– TVS STANDARD (page 47)
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects:
– Dolby Surround (Pro Logic) (page 76)
AV amplifier (receiver) with digital input jacks
having a Dolby Digital, DTS**, or MPEG audio
decoder and 6 speakers
• Surround effects:
– Dolby Digital (5.1 ch) (page 76)
– DTS (page 76)
– MPEG (5.1ch) (page 76)
z Hint
If you connect an AV amplifier (receiver) that
conforms to the 96 kHz sampling frequency, use
connection
D
20
.
through .
A D
Connection
(page 21)
A
(page 22)
B
(page 23)
C
(page 24)
D
* Manufactured under license from Dolby
Laboratories. "Dolby," "Pro Logic," and the
double-D symbol are trademarks of Dolby
Laboratories.
** "DTS" and "DTS Digital Out" are trademarks
of Digital Theater Systems, Inc.
Your setup (example)