Electro-Harmonix Attack Decay Manual page 23

S
ECONDARY
Visual
Feedback
PRESET 1 & Status LED
Slow blink. Blink speed increases as
you cycle through expression setting
PRESET 1, 2, or 3
Blink rapidly then blinking stops.
PRESET 1, 2, or 3
Lit solid.
PRESET 1, 2, or 3
LED unlit
PRESET 1, 2, or 3
Currently selected preset blinks.
PRESET 1, 2, or 3
Lit solid.
LED lit solid = FSW Control Enabled
LED off = FSW Control Disabled
PRESET 1 fast blink = CE on
PRESET 3 slow blink = CE off
All PRESET LEDs light
Fast blink = Current Curve
All PRESET LEDs light
Fast blink = Current Curve
PRESET 2 & Status LED
Two LEDs blink at different rates.
PRESET 3 & Status LED
Two LEDs blink at different rates.
PRESET 2
Fast blink = Return -> Harmonix
Slow blink = Harmonix -> Send
Status LED
Fast blink = Return Bypass enabled
Slow blink = Return Bypass disabled
Status LED
Fast blink = FSW Trigger enabled
Slow blink = FSW Trigger disabled
PRESET 2
Fast blink = Ext. Trigger enabled
Slow blink = Ext. Trigger disabled
PRESET 1
Fast blink = Comp On, Slo = Comp Off
Hold BYPASS until one or more
PRESET LEDs blink
O
PERATIONS
P LED
R
EFERENCE
End Operation
Press PRESET 1 two
more times after initial
mode entry to exit.
Release button
--
--
--
--
Release FSW after P
LED changes state.
Release both
footswitches.
Release all buttons
then press/release
button for curve choice
Release all buttons
then press/release
button for curve choice
PRESET 2 press and
release exits mode
PRESET 3 press and
release exits mode
Release all buttons
Release all buttons
--
--
Release buttons
Release footswitch
23
– C .
ONT
Saves to Presets
or Global
Saves to Presets
--
--
--
--
--
Global
Saves to Presets
Saves to Presets
Saves to Presets
Blend setting is
saved to presets
Blend setting is
saved to presets
Saves to Presets
Blend setting is
saved to presets
Blend setting is
saved to presets
Saves to Presets
Saves to Presets
All user presets and
settings will be
erased.