Brother PR-620 Tips And Techniques page 5

Tips and Techniques on the PR-620
5. Use the included threader to pass the thread through the number 1
needle bar thread guide.
6. Repeat this process for each needle to be threaded.
Threading the needle
Note: A design should be loaded in order to thread the
needles.
1. Move the needle threader to proper needle by
selecting that thread color.
2. Press the automatic needle threading button.
The hook on the automatic needle threading
mechanism passes through the eye of the
needle.
3. Pull out about 6 inches of thread. Then, as shown
in the illustration, pull the thread through the fork
of the automatic needle threader from the right,
and then after pulling the thread through the guide
on the presser foot, pull the thread through the
thread cutter to cut it.
4. Press the automatic needle threading button.
5. Repeat for remaining needles.