Brother PR-620 Tips And Techniques page 4

Tips and Techniques on the PR-620
Threading the machine
The numbers indicate the thread path for each of the numbered needle
bars.
1. Place on spool pin 1 the spool of the thread with
the color specified for the needle bar 1
2. Pass the thread through the number 1 hole in
the thread guide and wind the thread clockwise
once around the thread tension disc.
3. Use thread guides etched on machine to follow
path for each thread.
4. Pass the thread through the slot on the thread
guide, and then through the hole in the number 1
lower thread guides.