Brother PR-620 Tips And Techniques page 13

Hide thumbs Also See for PR-620:

Tips and Techniques on the PR-620

Specify pause locations before embroidering

1. Pause locations can be specified in the thread color change screen.

2. Touch

screen.

3. Touch

sequence display is the color where you wish to stop the machine before

sewing it.

4. Touch

a stop.

5. After specifying the desired stops, press

Temporary Needle Bar Settings

1. After embroidery begins, the machine can be stopped at a color change

and a different needle bar can be specified for the next color to be sewn

2. While sewing the color before the one that you wish

to change, touch

is finished, the threads are trimmed and the

machine stops.

3. Touch

4. Touch the key

with the color that you wish to embroider with.

5. Touch

6. Press

with the selected replacement color.

in the pattern editing screen or the embroidery settings

and

so that the color at the top of the thread color

and the mark

. After the color being sewn

for the needle bar threaded

and the embroidery screen apears again.

and the Start/Stop button and Embroidery will continue

will appear where you have designated