YASKAWA SOLECTRIA XGI 1500 Series Installation And Operation Manual page 14

Installation and Operation Guide SOLECTRIA XGI 1500 (Rev A, April 2019)
When positioned on the strut, the inverter and strut channels should appear as in Figure 3-5. To secure the
inverter in place, use two 8mm (
upper brackets, and two more through the front face of the lower bracket.
Figure 3-5 Inverter Mounted to Strut Channels, Back View (Upper Image) and Top View (Lower Image)
Lifting Heavy Object Hazard
Proper lifting technique must be used in order to avoid injuries.
Lifting requires at least two people or a mechanical hoist to install the Inverter.
5
/ in) bolts (not provided) through the holes provided in the top face of the
16
Slotted Holes for 8mm Bolts (not supplied)
C L
27.8 in
706 mm
C L
14 of 77