Firmware Update - YASKAWA SOLECTRIA XGI 1500 Series Installation And Operation Manual

Installation and Operation Guide SOLECTRIA XGI 1500 (Rev A, April 2019)
5.15

Firmware Update

This screen allows a user in Administrator mode to update the firmware.
The SOLECTRIA XGI 1500 series inverter supports both local and remote firmware updates. Remote updates
will be performed automatically from the Yaskawa Solectria Solar server or by request through our technical
support department by calling (978-683-9700 ext 2).
Local firmware updates must be performed with a laptop and an Ethernet cable.
By default, Enable Automatic Remote Firmware Update is selected. The inverter will check for firmware
updates and download automatically if an update is available. The firmware will only be downloaded to the
gateway inverter and then distributed to the rest of the inverters in the network. On the following morning, all
inverters will perform a self-update. The firmware download is a small file comprising only incremental data
bits. The data usage for the download will be minimal.
Having the Enable Automatic Remote Firmware Update unchecked is not recommended as product
improvements may have occurred since the purchase of the product. If the user disables this feature, the Site
Owner will be responsible for performing any firmware updates.
Figure 5-39 Firmware Update
57 of 77