Related Manuals for Motorola V8260
Summary of Contents for Motorola V8260
- Page 1 APPLICANT: MOTOROLA, INC. FCC ID: IHDT5AG1 INSTRUCTION MANUAL A preliminary draft copy of the Users Manual follows: EXHIBIT 8...
- Page 3 They cooked it, dusted it, and dropped it - the phone still worked ! We are confident that the one you purchase will meet your own exacting standards. Thank you for choosing Motorola, and by all means, enjoy your “Motorola V” phone !
- Page 4 - Extend your antenna fully. - Do not touch the antenna unnecessarily when the phone is in use. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level otherwise needed. V8260 V8260...
- Page 5 Pull off the road and park before making or answering a call if driving conditions to electronic equipment may not be shielded against the RF signals from your wireless require. phone. Pacemakers The Health Industry Manufactures Association recommends that a minimum separation on V8260 V8260...
- Page 6 V8260 V8260...
-
Page 7: Table Of Contents
Earpiece Vol. Receive a phone call Calculator Delete Second No. Keypad Tone Indicate CALL in absence Calendar Select Second No. Bell Link Tone Electronic dialing Features Change NAM Sending Tone List of originating numbers Bklt Color S/W Version V8260 V8260... -
Page 8: Before Use
MAIL Mybell Service Enter Characters Wireless Data Communication Service Enter Korean Characters How to use ear microphone Enter English Characters and Numbers Before thinking it is out of order Enter Special Characters Motorola Service Center Voice Mail Quality Assurance V8260... -
Page 9: Name And Function Of Each Part
BEFORE USE BEFORE USE BEFORE USE Confirm Components Name and Functions of Each Part Receiver Ear-microphone terminal (V8260/500 mAh) (V8260/900 mAh) LCD display Portable Phone Battery Pack Desktop Charger Antenna Service Lamp Volume button Charger User Manual Leather Holster Dial button... -
Page 10: Function Of Each Button
Displayed when User Times is set. Volume button - Searches menu item and Alarm one-touch dialing (See P.55) control volume during call (See P.111) Indicates electronic dial can be entered. (See P.30) Indicates that special characters can be entered. (See P.117) V8260 V8260... -
Page 11: How To Use Battery
Since battery pack for charging is a consumption goods, repeating charging and discharging will reduce life. If use time is reduced to about half, purchase and use a new a battery pack. V8260 V8260... -
Page 12: How To Charge Battery Pack
3. Charge state is indicated on lamp of charger (DC power unit). and battery pack in the rear socket. First charge the phone inserted in the front Purchase power cable additionally in near agent. charging socket. 3. Charge state is indicated on lamp of desktop charger. 220V 220V V8260 V8260... -
Page 13: Charge State Of Battery Pack
Charge time of battery pack (when phone is turned off) < When lamp blinks in red > This indicates that connection state of charging terminal is not good. Confirm the cleanness state V8260/500 mAh V8260/900 mAh Classification of battery pack and retry. -
Page 14: Use Time Of Battery Pack
Low voltage warning If battery pack is almost used out, beep-beep sound is heard and blinks. Classification V8260/500 mAh V8260/900 mAh If continuing to use it, power of the phone is turned off after a short time. Charge immediately. Continuous call... -
Page 15: How To Use Basic Functions
HOW TO USE BASIC Turn on power FUNCTIONS Press button long Service lamp is turned on, Motorola logo is displayed and after a short time, display Turn on power turns into initial display. Turn off power Make a phone call... - Page 16 Making a call with voice dial : Can make a call with voice without pressing DIAL button (See P.104~107) Pressing button returns the display to the initial screen Telephone numbers received in absence are stored in Unanswered list.(See P.44) V8260 V8260...
-
Page 17: Electronic Dialing
When the selected list of outgoing numbers is displayed, press [DEL] to erase the list. (See P.37) (To erase all lists of outgoing numbers, erase in Delete List . (See P.94) In case of telephone number stored in storage address, the name is displayed. V8260 V8260... -
Page 18: How To Use Menu Functions
After message is Features number and press address and press store and press to the icon to store displayed, Enter Lock / Security [STO]. [OK]. [OK]. and press next number is (See P.114~117) [OK]. displayed. Game Voice Mail Config Data V8260... - Page 19 Portable phone Pager User customized Turbo dial is set only in one icon of one storage address. Only icons containing stored telephone number is displayed when setting turbo dial. Setting or clearing turbo dial completes storing telephone number. V8260 V8260...
- Page 20 To erase stored contents of icon in address, select the icon and press long button number is displayed. to erase, and then press [OK]. Selecting the name to store can correct the name. To erase number when correcting, press button. V8260 V8260...
-
Page 21: Search Phone Book
In case you want to make a call to telephone number f icon in which turbo dial is not set. [OK]. [OK]. [OK]. Press to move to the address to call to and press [OK]. Press to move to the desired icon and press button. Pressing button moves to the previous menu. V8260 V8260... -
Page 22: By Name
In case there are a number of addresses relevant to the entered telephone number, all of the relevant addresses are displayed. V8260 V8260... -
Page 23: Called
View Phone Book and Called and press press [OK]. memory and press button to move to the press [OK]. [OK]. previous menu. [OK]. To store, press [STO] to store. (See P.33~36) To erase, press [DEL]. (See P.37) V8260 V8260... -
Page 24: Unanswered
When a call is received to the telephone number stored in memory address, the name is displayed together with the number. To store, press [STO] to store. (See P.33~36) To erase, press [DEL]. (See P.37) V8260 V8260... -
Page 25: Tone Control
Button tone no sound Alarm tone vibrating and lamp blinks Link tone no sound One minute no sound One minute no sound Call alarm vibrating and lamp blinks (when setting No Sound, no sound) V8260 V8260... -
Page 26: Ring/Vib
After selecting ringer volume, move to the previous menu. Vibration : Vibration occurs ( is displayed on screen) Ringer volume : 5 levels Bell after vibration : Bell rings after vibration ( blinks on screen) Lamp : Only lamp blinks V8260 V8260... -
Page 27: Earpiece Vol
[OK]. press [OK]. After selecting earpiece volume, move to the previous menu. After selecting keypad tone, move to the previous menu. Earpiece volume: 5 levels Keypad tone: 6 levels During call, Earpiece vol can be adjusted. (See P.111) V8260 V8260... -
Page 28: Link Tone
[OK]. and press [OK]. menu. Briefly : Pressing keypad button produces brief beep sound. Long : While pressing [Dial] button, long beep sound is heard. While keypad buttons except for [Dial] button, beep sound is heard continuously. V8260 V8260... -
Page 29: Alarm/Timer
Alarm menu. Ring after 1 hour : Alarm rings after 1 hour of alarm setting. If alarm is set, is displayed on screen. To stop when alarm rings, press any keypad buttons or open and close folder. V8260 V8260... - Page 30 Pressing time and minute using [Dial] button automatically moves to the next column. Ring one time : Rings one time in the set time. Ring daily : Rings daily in the set time. If alarm is set, is displayed on screen. V8260 V8260...
- Page 31 [OK]. press [OK]. quick set and press the previous menu. press [OK]. press [OK]. time and press the previous menu. [OK]. [OK]. If alarm is cleared, disappears from screen. If alarm is cleared, disappears from screen. V8260 V8260...
-
Page 32: World Times
Detroit, Miami Paris, Amsterdam Bangkok, Jakharta Seattle Washington Rome, Berlin, Vienna Singapore San Francisco Montreal, New York Athens, Helsinki Beijing, Hongkong Taipei To move to the previous menu, press button To move to the initial screen, press button V8260 V8260... -
Page 33: User Times
[OK]. times and press move to the [OK]. [OK]. previous menu. Entering time and minute using [Dial] button automatically moves to the next column. If user time is set, it is displayed as in the right figure. V8260 V8260... -
Page 34: Individual
Alarm / Timer and press move to All Calls displayed. [OK] / [CNCL] or [OK]. and press button moves to the [OK]. and press button moves to the [OK]. previous menu. [OK]. previous menu. All Calls is not initialized. V8260 V8260... -
Page 35: Roam Calls
[CNCL] moves to the previous menu. Pressing [RESET] can initialize reset timer. Initializing When Reset Timer is displayed, press [RESET] Press to select setup value of initialization and press [OK] After message is displayed, move to the previous menu. V8260 V8260... -
Page 36: One Minute
If the user stores schedule, alarm tone rings in the designated day and stored contents is displayed. [OK]. and press [OK]. Press Press to move to Press to move [MENU]. PIMS and press to Schedule and [OK]. press [OK]. V8260 V8260... - Page 37 To move to the previous column, press button For Enter Contents for schedule, up to 16 characters of Korean alphabets and up to 32 English alphabets can be entered. Pressing button moves to Schedule . Pressing button displays PIMS menu. V8260 V8260...
- Page 38 [OK]. calendar, press [OK]. is displayed. press [OK]. calendar,press displayed, press and press [OK]. move to the [OK]. [DEL]. previous menu. Pressing [CNCL] moves to the previous menu. V8260 V8260...
-
Page 39: Work Plan
In case the user does not want to enter time for work plan, set setup value for time as No For contents for work plan, up to 16 characters of Korean alphabets and 32 characters of English alphabets can be entered. For work plans, up to 10 plans can be entered. V8260 V8260... -
Page 40: Confirm Work Plan
The list of work plan to be confirmed by the user is indicated as To delete , press [UNLOC] when contents for work plan, date and time is displayed. In case alarm time is not entered, calendar is not displayed. V8260 V8260... -
Page 41: Calculator
Press to search Date For division, down to 3 digits below decimal point is displayed. Pressing [CNCL] moves to the previous menu. To initialize after calculation is competed, press [=]. Calendar is displayed from 1980 till 2019. V8260 V8260... -
Page 42: Features
[OK]. menu. [OK]. [OK]. 5 seconds : LCD is turned off 5 minutes after opening folder When opening flip : While flip is open, LCD remains ON. Always off : Even when flip is open, LCD remains ON. V8260 V8260... -
Page 43: Banner
For contents for initial screen, up to 10 characters of Korean alphabets and 20 characters of If pressing button, city code disappears. English alphabets can be entered. Pressing number displays city code set. If not entering nothing Banner , Motorola logo is displayed on initial screen. V8260 V8260... -
Page 44: Intl.code
Intl. Code set. service lamp is set) Red-yellow-red Red color stops Lamp state Yellow color blinks Red color blinks briefly blinks alternatively Cellular Service available Service unavailable When receiving a When call is phone state state state phone call connected V8260 V8260... -
Page 45: Auto Hyphen
Redial to select setup value of displayed, move to the Features and Hyphen and press hyphen and press previous menu. Features and and press redial and press previous menu. press [OK]. [OK]. press [OK]. [OK]. [OK]. [OK]. V8260 V8260... -
Page 46: Call Answer
Folder Answer : When Folder Answer is set to YES , open the folder to answer the call if a call is received. When Folder Answer is set to NO , open the folder and then press the keypad button to answer the call. V8260 V8260... -
Page 47: Lock/Security
LOC, No. 1, regardless of the lock state (See P. 92) How to set : To push button for a while will set Lock Mode. How to release : To enter the password after pressing button for a while will release Lock Mode. V8260 V8260... -
Page 48: Change Pwd
It is possible to save up to three emergency numbers. If the user saves the emergency number at the storage location and sets it as a turbo dial, he or she can use it as a speed emergency dial (See P. 35) V8260 V8260... -
Page 49: Clear Calls
If there is no information to erase, the message, There is no message to delete. will appear. Restrict 700 : It restricts the phone numbers starting with 700. Restrict memory LOC : It restricts the use of making a call and designating/erasing a phone number. V8260 V8260... -
Page 50: Default Mode
Lock / Security Number and Enter the password. Registration and message and press press [OK]. press [OK]. appears. [OK]. Enter the password. Press to turn on the power to use the mobile phone again (See P. 27) V8260 V8260... - Page 51 [OK]. appears. [OK]. [OK]. Enter the password. Bell : Bell 1 ~ Bell 4 Melody : Melody 1 ~ Melody 10 User : User 1 ~ User 3 (See P. 135) V8260 V8260...
-
Page 52: S/W Version
NAM and press [OK]. [OK]. desired NAM NAM appears after the Lock / Security Change and Enter the password. and press on the screen. message and press press [OK]. [OK]. appears. [OK]. Enter the password. V8260 V8260... -
Page 53: Game
: Hold Poker : Redeal The user can choose any of the following three levels for the car race: beginner, intermediate, and advanced. Press any button on the keypad to start a game or move to next screen. V8260 V8260... -
Page 54: Voice Dial
[NEXT] is pressed, the next name saved is heard and the corresponding phone number appears. Repeat entering the name to save twice according to the announcement and then save the phone number by entering it. It is possible to save up to 10 voices. V8260 V8260... -
Page 55: Auto Dialing
It is possible to make a call by voice dialing only when Automatic Dialing is in the Set state. message appears, the phone number will appear. All the Restricts should be set to Release to use the automatic dialing function. V8260 V8260... -
Page 56: Config Data
Please, contact the service provider for details. After the connection between a mobile phone and PC or a notebook is established, the data transmission is performed at the data speed set on PC or a notebook. Please, contact the service provider for the details. V8260 V8260... -
Page 57: Functions Used During Call
Even though the user does not save the number additionally after entering it, he or she can make a call by pressing button after a call is completed. The phone number entered as a memo during a call is saved in Calling .(See.P.31) V8260... - Page 58 Return to Call Mode after sending out the user s number. Text Mail Send Mail Block Sending Tone Delete Mail It is possible to enter and save a new phone number during a call. Alert Method Press [MUTE] during a call. Press [MUTE] again to release Block Sending Tone V8260...
- Page 59 : Press twice. : Press twice. : Press three times. : Press three times. : Press three times. : Press four times. : Press four times. : Press four times. : Press five times. V8260 V8260...
-
Page 60: Enter Special Characters
: Press once. : Press once. : Press once. : Press twice. : Press twice. : Press twice. : Press three times. : Press three times. : Press three times. : Press four times. : Press four times. V8260 V8260... -
Page 61: Voice Mail
[OK]. When the information on the received voice mail is indicated, Press [DEL]. Press to select the desired set value and press [OK]. When several voice mails are received, the information on the most recent voice mail appears. V8260 V8260... -
Page 62: Text Mail
There is no caller s number. appears.) the received text mail appears, press button. To press button while checking mails will make a movement to the previous menu. Text mail not checked Text mail checked Repeated mail Mail whose protection is set. V8260 V8260... -
Page 63: To Send
(See P. 114 ~ 117) If a mail is saved, it is possible to send the same mail by selecting the saved mail without entering the contents again. The saved mail can be searched in Saved Mail . V8260 V8260... -
Page 64: Recall Msgs
[OK]. [OK]. [OK]. [OK]. press [OK]. appears. When sending fails, The system prompts a message, Sending fails, and asks if the user wants to try again. Select the set value. Select the sending method. Resend. V8260 V8260... -
Page 65: Delete Mail
It is necessary to first release the mail protection to delete the mail for which Mail 2m Interval : The alarming sounds are generated every two minutes to Protection is set (See P. 121) notify a mail reception until the user checks it. Cancel Alert : The alarming sound is not heard. V8260 V8260... -
Page 66: Set Preview
Contents : The received text mail appears on the screen immediately and it is possible [OK]. [OK]. [OK]. message to search the received contents by using appears. Head Line : The kind of the received mail and the sender s number appear. V8260 V8260... -
Page 67: Appendix
How to Use an Ear Microphone [OK]. appears. Before thinking it is broken Motorola Service Center Warranty What is Proxy URL? Being located between the user and the service server, it takes the roles of brining the desired requests according to the user s request and transferring it to him or her. -
Page 68: Recording
[CNCL] will cancel the recording. [OK]. Press button When the user wants to delete the item which is being played currently, Press [DEL] when the recording is played. Press to select the desired set value and press [OK]. V8260 V8260... -
Page 69: Connect To N.top
The melody is downloaded through Bell / Melody and select the registered User (See P. 46 ~ 47) User 1 ~ User 3. Press [OK] to select the desired item. Press button to end n.TOP. When the connection to n.TOP is made, appears. V8260 V8260... -
Page 70: Wireless Data Communication Service
If taking the ear microphone out of the ear during the call, the user can talk through the mobile phone. If the ear microphone is connected to the mobile phone, to close the folder during a call would not terminate the call. V8260 V8260... -
Page 71: Before Thinking It Is Broken
Consequently, charge it before using it. When the mobile phone is in the low voltage state, the The red light blinks on the charge lamp of the charger. Attempt a call again after checking the location of the battery pack. function related to memory does not operate. V8260 V8260...