Checkout Procedure - Ametek PMC BOOSTER Series Hardware Manual

It is then recommended, though often not required, to CLOSE and REOPEN VersaStudio.
The Status Bar in VersaStudio will also show:
The Instrument Properties will show the Current Range as FIXED to the range determined by the
BOOSTER. For these PMC BOOSTERs that is 200 mA.
This INI file adjustment then scales all currents and, if applicable, voltages correctly.

CHECKOUT PROCEDURE

Using a 100 mOhm resistor such as described earlier in this document; the PMC Channel and Booster
combination should be able to successfully execute the following test and give these representative
results.