Parallel Boosters, Use For Even Higher Currents; Connections; Boosters In Parallel - Connections At The Potentiostat Leads (We, Ce, Gnd); Boosters In Parallel - Connections At The Cell - Ametek PMC BOOSTER Series Hardware Manual

PARALLEL BOOSTERS, USE FOR EVEN HIGHER CURRENTS

PMC Boosters can be operated in parallel to achieve even higher currents, up to 20Amps.

Connections

These connections require special cabling that is not delivered as standard. Contact the factory for the
Part Numbers associated with the cabling for this configuration.
In principle, the current-carrying leads (Working and Counter) and Ground from the single poteniostat are
connected to a Y-cable and then to the CE, WE, and GND connections on both boosters.
Boosters in Parallel – Connections at the Potentiostat Leads (WE, CE, GND)
Boosters in Parallel – Connections at the Cell