Game Features; Starting-Up; Player Controls; Control Panel Diagram - Midway TERMINATOR 2 JUDGMENT DAY Operation Manual Addendum

(Note)
When an error is detected during
Start-up Tests. game start-up
pauses. Press any Start Button to
continue.
Game Features
STARTING UP
Switch On power to the game. A "rug" pattern appears on the
CRT screen. When the "rug" pattern ends. the screen shows
CHECKING SCRATCH RAMS. and then CHECKING ROMS.
The next screen shows Terminator 2 REVISION LEVEL.
CMOS TEST OK and the COIN SETTING. The game then
moves to the Attract Mode.
Insert the desired amount of coins or tokens. Select which
player receives the credit by pressing the appropriate Player
Start Button.
PLAYER CONTROLS
Billi
Start Button
Each player has two Start Buttons located on the left
and right sides of the guns. The Start Buttons allow
one or two players to begin or continue play.
[] Guns
Each player has a gun. The guns allow the player to
aim for and shoot at moving targets.
filill] Bomb Button
Each player has a Bomb Button located on the front
left side of their gun. This button allows the player to
fire bombs at targets.
[ill
LEDs
Each player has two LEDs located on the top of their
gun. The Red LED indicates the player is targeted
and being shot at. The Green LED indicates that the
player is on target to shoot.
2
Start
(Q)
(Q) (Q)
1
Start
2
Start
Control Panel
1-8